Bruce, Instead of trying to figure out exactly where to drill holes, I’d do what they suggest — a rectangular cut-out to access everything.
However, personally, I wouldn’t do a teak cover, but a smoke-white sheet of plexi with LEDs inside as better cabin lighting. Hmmm..... All the best, Edd --------------------------------------- Edd M. Schillay Captain of the Starship Enterprise C&C 37+ | Sail No: NCC-1701-B City Island Yacht Club | City Island, NY www.StarshipSailing.com --------------------------------------- 914.774.9767 | Mobile --------------------------------------- Sent via iPhone X iPhone. iTypos. iApologize On Mar 22, 2019, at 10:42 AM, Dennis C. via CnC-List <cnc-list@cnc-list.com> wrote: I installed a jib track on Touche'. I covered the fasteners and headliner cut out with a varnished teak cover. https://drive.google.com/open?id=0B_sb5TfIENvsaEhUREJ0LXRDUTg The piece of teak is hollowed out. It is held up by fasteners are tapped into the aluminum backing plate. Dennis C. Touche' 35-1 #83 Mandeville, LA > On Fri, Mar 22, 2019 at 8:41 AM David via CnC-List <cnc-list@cnc-list.com> > wrote: > Bruce, > > I removed my headliner (cut, scraped...it was ugly and messy) at the point of > installation, got to the underside of the deck, hrough bolted, and covered > the whole thing with a strip of finished teak. Looks like it belongs there. > > David F. Risch, J. D. > Gulf Stream Associates, LLC > (401) 419-4650 > > > _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
