I think this is an interesting read: 
https://www.sail-world.com/news/208083/?source=email or even better: 
https://www.maritimenz.govt.nz/commercial/safety/accidents-reporting/accident-reports/documents/Platino-mnz-accident-report-2016.pdf
 (from the horse’s mouth, a PDF).

Even with the boom preventer one should be careful how the boats is helmed.

The main issue there was not related to the boom preventer, but the preventer 
itself was incorrectly rigged and failed catastrophically.

On any boat of reasonable size (anything bigger than a dingy) I always gybe 
using the mainsheet to bring the boom to the centreline and then releasing it 
in controlled manner. By doing it always, I make sure that I would do it 
correctly, when the wind is strong enough to make any damage.

Marek

From: CnC-List <cnc-list-boun...@cnc-list.com> On Behalf Of Josh Muckley via 
CnC-List
Sent: Sunday, March 17, 2019 19:37
To: C&C List <cnc-list@cnc-list.com>
Cc: Josh Muckley <muckl...@gmail.com>
Subject: Re: Stus-List Gybe preventer, now Boom Brake

In my opinion boom brakes are more work and clutter than they are worth.  I 
always tend the mainsheet when performing a gybe.  By tend I mean center the 
traveler and pull in the sheet to center the boom.  As the gybe occurs I 
quickly release the sheet.  On multiple occasions I've seen main sails pop as a 
result of uncontrolled or "forced over" gybes.

Care is always required when going downwind but with an attentive helmsman a 
preventer can sometimes be avoided.  Most boats are actually slower dead 
downwind so pick one side or the other.  The most often time when a preventer 
is unavoidable is wing and wing.

Josh Muckley
S/V Sea Hawk
1989 C&C 37+
Solomons, MD



On Sun, Mar 17, 2019, 11:08 AM David Knecht via CnC-List 
<cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote:
Thanks for all the info on preventers.  I plan to use the advice to rig one 
when spring finally arrives and use it on long downwind cruises.  This 
discussion also led me to look into boom brakes.  I have always been concerned 
about getting hit by the boom on a gybe, and being 6’ 3”, it is a particular 
problem.  I had never thought of a boom brake as a device for my safety as 
opposed to the boat’s safety but realize now that this might be well worth 
installing on both accounts.  They seem to come in simple inexpensive solutions 
(https://dreamgreen.org/boom-brake<https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fdreamgreen.org%2Fboom-brake&data=02%7C01%7C%7C83e07bc7583845238b0208d6ab31a4e4%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636884627034088199&sdata=PFxvGoFY5xTLIxjvCxtBu3j6xWpjc%2FJEvt2uYPnzWVI%3D&reserved=0>)
 to more complicated and expensive devices 
(http://www.boom-brake-walder.com<https://nam04.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.boom-brake-walder.com&data=02%7C01%7C%7C83e07bc7583845238b0208d6ab31a4e4%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636884627034098204&sdata=rE8nUqyRJlvAry%2FFKH%2FxF%2BRPTZGgav15wbvPKj6FU9g%3D&reserved=0>).
  In all cases, I worry about another couple of lines to trip over when moving 
on the side decks, thus trading one hazard for another.  Thoughts?  Dave

S/V Aries
1990 C&C 34+
New London, CT

[cid:4073BE72-4704-4EA7-8EBA-B73B833F502B]

_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   
https://www.paypal.me/stumurray<https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.paypal.me%2Fstumurray&data=02%7C01%7C%7C83e07bc7583845238b0208d6ab31a4e4%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636884627034108215&sdata=EHqZ7b%2FM%2FTMvKkfmwxtg26GuRp86jhKgVAWtBmbk5zA%3D&reserved=0>
_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Reply via email to