My solution was to have some Sunbrella covers made for the wood
handrails. Takes nearly all the maintenance work away. Haven’t touched them
in 3 years.
Jim ReinardyC&C 30-2 “Firewater”Milwaukee, WI
Get Outlook for iOS
On Mon, Feb 18, 2019 at 9:11 PM -0600, "John Conklin via CnC-List"
<cnc-list@cnc-list.com> wrote:
Me too 2nd the vote for the stainless!
https://drive.google.com/open?id=1ux528c82YTnHOi5ufTJ63xuGtFAm7lYQ
John Conklin
From: CnC-List <cnc-list-boun...@cnc-list.com> on behalf of Josh Muckley via
CnC-List <cnc-list@cnc-list.com>
Sent: Monday, February 18, 2019 9:15:43 PM
To: C&C List
Cc: Josh Muckley
Subject: Re: Stus-List Epoxy or not.
Replace with stainless steel. I think I paid
$100 for each rail. Custom made to fit the original holes.
Whitewatermarine.com
https://drive.google.com/folderview?id=0B8pEh5lnvP1yd0UxdVVfWkEybjA
Josh Muckley
S/V Sea Hawk
1989 C&C 37+
Solomons, MD
On Mon, Feb 18, 2019, 6:31 PM Bev Parslow via CnC-List <cnc-list@cnc-list.com
wrote:
Just doing the teak handrails. They are coming up quite well BUT do I epoxy and
then 3-4 coats of varnish or just put the varnish on an skip the epoxy?
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray
