On my 35 mkii i have the original traveller mounted on the bridge deck
triple blocks for the main sheet 7:1 advantage with ratchet block and cleat
to control. 18 inch wire between the boom and moveable blocks. It works
great a 70 year old lady can trim in winds to 20 apparent. I love the setup
because i can trim while at the wheel single handed or with crew

On Wed, Nov 14, 2018 at 12:50 PM Marek Dziedzic via CnC-List <
cnc-list@cnc-list.com> wrote:

> Steve,
>
> My boat is smaller, but I am using almost the same set-up. I prefer to
> have the extra block outside (and attached to the boom), but it makes
> little difference.
>
> https://www.dropbox.com/s/4u0om487skpwoc3/20140830_160655.jpg?dl=0
>
> I like it a lot and I find it to work much better than the original system
> that was two-ended (one to the winch, one free for direct adjustments).
> This system is fast for gybes (3:1) and good for fine adjustments (6:1).
>
> Make sure that you have the proper angle for the sheets to come off the
> bottom block. Garhauer would adjust it for you.
>
> I did not buy the kit; rather, I built it myself. The bottom block was, I
> think, 30-05us (??) - around $85 and the top was 30-17us - $70. When I
> googled your part number, only Garhauer NZ showed up and the price was over
> $1000. I hope you won't plan to pay that much.
>
> Keep in mind that your boat is bigger, so you are probably looking at the
> 40-series blocks.
>
> Good luck
>
> Marek
>
> 1994 C270 ”Legato”
> Ottawa, ON
>
>
>
>
> -----Original Message-----
> From: CnC-List <cnc-list-boun...@cnc-list.com> On Behalf Of steve dewar
> via CnC-List
> Sent: Wednesday, November 14, 2018 09:16
> To: cnc-list@cnc-list.com
> Cc: steve dewar <stevede...@me.com>
> Subject: Stus-List C&C 35 mkiii mainsheet traveler
>
> I am looking at replacing my  traveler system to a Garhauer 40-2sp
> system.  I presently have the sheet going from the traveler thru blocks to
> the mast, and back to a winch on the cabin top. It’s slow and isn’t great
> for fine adjustments. Does anyone find any issues that would nix my idea?
> Thanks
> Steve
>
>
> Sent from my iPad
> _______________________________________________
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --
> https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.paypal.me%2Fstumurray&amp;data=02%7C01%7C%7C60538086d2be4d6d741008d64a3bccd3%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636778018023828871&amp;sdata=rBeIRkAAFof4XBAP4vTEOA82pXqtwEE6WFLLwtdkKfI%3D&amp;reserved=0
>
> _______________________________________________
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
> --
Sent from Gmail Mobile
_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Reply via email to