Yes, that was my initial thought. I’ve got depth and speed on that side but I think I can squeeze the mount close to the companionway opening. I think the Ram is the way to go but they are a bit unsightly IMHO I looked into some small monitor mounts at Walmart that might work
Sent from Yahoo Mail for iPhone On Thursday, November 1, 2018, 1:58 PM, Jeremy Ralph via CnC-List <cnc-list@cnc-list.com> wrote: Chris, I'd be careful with electronics being too close to a compass as that can cause deviation. Could you mount on the starboard side, away from the compass? ---------- Forwarded message ---------- From: Chris Graham <sabre28...@yahoo.com> To: <cnc-list@cnc-list.com> Cc: Bcc: Date: Thu, 1 Nov 2018 16:27:46 +0000 (UTC) Subject: Re: Stus-List GPS mount swing arm Hi Jeremy!! I have a Tiller. I was thinking port side as well. My compass is mounted on that side but that shouldn’t be an issue, correct? Thanks for the pics! I’ll check them out now! Chris Sent from Yahoo Mail for iPhone On Thursday, November 1, 2018, 12:22 PM, Jeremy Ralph via CnC-List <cnc-list@cnc-list.com> wrote: Hi Chris, Do you have a tiller or wheel? For my tiller boat I put a beefy RAM Mount on the cockpit's port bulk head, replacing some old/broken instruments. Some pics of the before and after here on this Flickr album: https://flic.kr/s/aHsmuTuHzS Cheers, Jeremy _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
