I have not been following this thread so, someone may have suggested
this but,
I just get a hose, long enough to keep the Jerry can sitting above the
fuel fill with the hose into the fill, up, into, and down to the bottom
of the can. Then, you make seal with your hand, around the hose at the
jerry can opening, and blow into the can (with your mouth) this will
give enough pressure to start the fluid flowing up and through the hose
down into the tank. Then a vacuum takes it from there! easy peasy!
the jerry can needs to be full so you don't need to pressurize too much
of an air pocket. The longer you keep the hose submerged in the fluid
the more fluid is transferred to the fuel tank. I can pretty much empty
the jerry can this way. It clean and easy. Just have a rag to wipe
down the hose as it comes out the can and you can be drip free!
Danny
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray
