https://edsonmarine.com/content/EB%20345-09%20Painting%20instructions.pdf
From: Chuck Saur via CnC-List Sent: Friday, October 12, 2018 9:01 AM To: cnc-list@cnc-list.com Cc: Chuck Saur Subject: Stus-List Painting pedestal Happy fall to all... I have disassembled most of the Edson pedestal on my new-to-me 37+ to replace the brake, replace the guard, install a new pod, do some rewiring, and lube and inspect steering. So now I want to paint the old faded black with a new shiny gloss white. I would rather do this in place, not removing the ped. I'm fairly adept in the fine art of masking tape. The old black powder coat is intact, sandable and prime-able. I had the pedestal powder coated on my old 35-3 and loved the results, but am exploring painting this one. My question for the list-er collective expertise is what paint and/or procedure would you recommend for this task? Anyone try this? And additional thanks for recommending the idler wheel/bottom plate checkup. All is fine. Thanks!! Chuck Saur (517)-490-5926 -------------------------------------------------------------------------------- _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
