Sent off list.  There are more but you’ll get the gist of it.

Mike
PERSUASION
C&C 37 K/CB
Long Sault

> On Aug 2, 2018, at 9:51 AM, bushmark4--- via CnC-List <cnc-list@cnc-list.com> 
> wrote:
> 
> Mike, can you send me some photos? Thanks
> 
> Richard
> s/v Bushmark4; 1985 C&C 37 CB; Ohio River
> Richard N. Bush 
> 2950 Breckenridge Lane, Suite Nine
> Louisville, Kentucky 40220-1462 
> 502-584-7255
> 
> 
> -----Original Message-----
> From: Persuasion37 via CnC-List <cnc-list@cnc-list.com>
> To: cnc-list <cnc-list@cnc-list.com>
> Cc: Persuasion37 <persuasio...@gmail.com>
> Sent: Thu, Aug 2, 2018 8:43 am
> Subject: Re: Stus-List Centre board
> 
> Well it’s done.  The centre board has been installed.  Like Edd I pinned it 
> in place, but it is not permanent.  The pins can be removed, the pendant 
> applied and it’s a keel/centre board again.   So I guess I’ll have to call 
> Persuasion a shoal draft for now.
> 
> Mike
> PERSUASION
> C&C 37 K/CB
> Long Sault
> 
> On Jun 28, 2018, at 1:20 PM, Edd Schillay via CnC-List 
> <cnc-list@cnc-list.com> wrote:
> 
> Mike,
> 
> The local yard did the work, but, essentially, they bolted through the lead 
> into the board, then added epoxy and fiberglass to the bottom to fill the 
> slot. 
> 
> All the best,
> 
> Edd
> 
> 
> Edd M. Schillay
> Starship Enterprise
> C&C 37+ | Sail No: NCC-1701-B
> City Island, NY 
> Starship Enterprise's Captain's Log
> 
> 
> 
> 
> 
> On Jun 28, 2018, at 1:04 PM, Mike Taylor via CnC-List <cnc-list@cnc-list.com> 
> wrote:
> 
> Edd
> 
> I’m curious how did you seal your board in place.
> 
> Mike
> 
> On Jun 28, 2018, at 11:46 AM, Schillay.com via CnC-List 
> <cnc-list@cnc-list.com> wrote:
> 
> Mike,
> 
> As most everyone on the list knows, I sailed with a centerboard on my 37+ for 
> almost 15 years before sealing it in the keel. While the 37 has a different, 
> deeper board, here’s what I discovered when it came to my boat:
> 
> In a good breeze, going upwind, it’s certainly an advantage. While we didn’t 
> necessarily point higher, we did side-slip slightly less. For cruising, it’s 
> not a big deal, but if you race the boat, you’ll want it down upwind. 
> 
> In light air, having that much more “boat in the water” when the board was 
> down was more of a disadvantage. If it’s 5 knots or less, you will sail 
> faster with the board up on all points of sail. Additionally, the slot itself 
> is a bit of a drag when it comes to water flow. 
> 
> Not only did I fix the board in the up position, I sealed the bottom — no 
> slot. I actually sail faster now off the wind.  I did add a drain plug, but 
> I’ve found not much water has been collecting inside. 
> 
> Interestingly enough, I raced the Enterprise for a season and a half with the 
> board sealed in place. Ultimately I saw no difference — we were as 
> competitive as we were before and finishing in the same place as before with 
> the same time differences between the same competition. This was for one-hour 
> or so beer-can racing, and perhaps things would be different on longer races. 
> Oh — and sealing it gave me one less whiny crew member in the pit since they 
> no longer had to winch that thing up after the windward mark rounding. 
> 
> Maintenance issues is a biggie. If you keep the board, you are looking at 
> replacing that cable every 5-8 years. For the 37+ design, there’s no way a 
> diver can do it — it must be a haul and the yard will charge you extra for 
> staying in their travel lift for the duration of the swap. And if that cable 
> should happen to break, you could be looking at a world of damage to your 
> keel. 
> 
> 
> All the best,
> 
> Edd
> 
> 
> Edd M. Schillay
> Starship Enterprise
> C&C 37+ | Sail No: NCC-1701-B
> City Island, NY
> Starship Enterprise's Captain's Log
> On Jun 28, 2018, 11:21 AM -0400, Persuasion37 via CnC-List 
> <cnc-list@cnc-list.com>, wrote:
> To all you keel/centre board owners, I’m wondering how many of you actually 
> use the centre board?
> 
> Some of you may recall that the pendant let go somewhere in the Bahamas in 
> 14/15. Fortunately the board was jammed up inside and had been for a number 
> of years. Upon my return to Canada I removed the board and it has been in my 
> garage ever since. Long story short it is repaired and I am ready to 
> re-install the board. I’m thinking of just pinning the board in the up 
> position. I have all the hardware but I’ve only had the board deployed 3 
> times in 12 years. This should also relieve any maintenance issues. Any 
> thoughts?
> 
> Thanks in advance for the feedback.
> 
> Mike
> PERSUASION
> C&C 37 K/CB
> Long Sault
> _______________________________________________
> 
> Thanks everyone for supporting this list with your contributions. Each and 
> every one is greatly appreciated. If you want to support the list - use 
> PayPal to send contribution -- https://www.paypal.me/stumurray
> 
> _______________________________________________
> 
> Thanks everyone for supporting this list with your contributions.  Each and 
> every one is greatly appreciated.  If you want to support the list - use 
> PayPal to send contribution --   https://www.paypal.me/stumurray
> 
> _______________________________________________
> 
> Thanks everyone for supporting this list with your contributions.  Each and 
> every one is greatly appreciated.  If you want to support the list - use 
> PayPal to send contribution --   https://www.paypal.me/stumurray
> 
> 
> _______________________________________________
> 
> Thanks everyone for supporting this list with your contributions.  Each and 
> every one is greatly appreciated.  If you want to support the list - use 
> PayPal to send contribution --   https://www.paypal.me/stumurray
> 
> _______________________________________________
> 
> Thanks everyone for supporting this list with your contributions. Each and 
> every one is greatly appreciated. If you want to support the list - use 
> PayPal to send contribution -- https://www.paypal.me/stumurray
> 
> _______________________________________________
> 
> Thanks everyone for supporting this list with your contributions.  Each and 
> every one is greatly appreciated.  If you want to support the list - use 
> PayPal to send contribution --   https://www.paypal.me/stumurray
> 
_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Reply via email to