Hi Chuck- Can you provide some pictures of this setup?  I have not pulled mine 
for racing because it does not fit under the pulpit so I would ahve to 
disconnect the chain, lift it over the pulpit to store and then reconnect if 
needed.  One of the unexpected disadvantages of the Rocna design.  That did not 
seem safe to me so I have left it on.  I guess it would not take long to run 
the chain through the pulpit and rethread the shackle.  Does yours fit under 
the pulpit?  Dave

> On Jun 27, 2018, at 11:07 AM, Chuck S via CnC-List <cnc-list@cnc-list.com> 
> wrote:
> 
> What's the problem.  Is it hard to dock?
> 
> I went to a lot of trouble to get my anchor out as far as practical so it 
> wouldn't hit the hull.  Heavy duty roller/channel for the anchor, backing 
> plate underneath and custom shim pieces molded to level the deck camber, five 
> SS thru-bolts, some are angled. I pull the anchor when racing.  I have a 
> system using a 20 foot length of line and caribiner, clip onto the cross rod 
> of the Delta head and tension that over the pulpit, then release the main 
> anchor line and I can lift the Delta over the pulpit onto the deck.  This 
> takes minutes.
> 
> Chuck
> Resolute
> 1990 C&C 34R
> Broad Creek, Magothy River, Md
> 
> 
>> On June 27, 2018 at 9:30 AM Home via CnC-List <cnc-list@cnc-list.com> wrote:
>> 
>> 
>> I have a beautiful 1986 38-ft MKIII.
>> The one thing I hate about my boat is the anchor
>> The anchor sticks a mile out and it is tied at the shackle to keep it 
>> secured. 
>> I have been looking at other boats, no CNC in the area close by. 
>> I was hoping someone withe same boat could tell me what they have set up
>> 
>> Sent from my iPad
>> 
>> _______________________________________________
>> 
>> Thanks everyone for supporting this list with your contributions.  Each and 
>> every one is greatly appreciated.  If you want to support the list - use 
>> PayPal to send contribution --   https://www.paypal.me/stumurray
>> 
> 
> _______________________________________________
> 
> Thanks everyone for supporting this list with your contributions.  Each and 
> every one is greatly appreciated.  If you want to support the list - use 
> PayPal to send contribution --   https://www.paypal.me/stumurray
> 

Aries
1990 C&C 34+
New London, CT



_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Reply via email to