Mike, I coated the male and female sides of my RAM mike connection with TefGel at installation. No issues for years.
If it were me, I'd spray the connections liberally with Boeshield T-9 (which every boater should have on their boat 24/7), make the connection several times, then coat with TefGel. Dennis C. Touche' 35-1 #83 Mandeville, LA On Tue, Jun 12, 2018 at 9:58 AM, Hoyt, Mike via CnC-List < cnc-list@cnc-list.com> wrote: > Persistence has a Standard Horizon GX2150 VHF with a cockpit mounted Ram > mic. The connection is becoming intermittent and I have noticed > oxidization in the boat side socket. > > > > What is the best way to clean the oxidization from these pins? I think > the pins are copper and the oxidization is green and likely the source of > my poor connection. > > > > I wish to clean but not damage the plastic housing or short the connectors > when the ram mic is plugged in. > > > > Am assuming the brain trust has dealt with this many times before > > > > Thanks > > > > Mike > > Persistence > > Halifax, NS > > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > > >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
