Joe, The sheaves are designed for both. I transitioned to all rope and have never looked back.
Neil 1982 C&C32 FoxFire Rock Hall, MD Neil Andersen 20691 Jamieson Rd Rock Hall, MD 21661 ________________________________ From: CnC-List <cnc-list-boun...@cnc-list.com> on behalf of Joe Della Barba via CnC-List <cnc-list@cnc-list.com> Sent: Tuesday, May 15, 2018 9:47:07 AM To: cnc-list@cnc-list.com Cc: Joe Della Barba Subject: Re: Stus-List Time for new halyard... Recommendations? My jib halyard is shot. I always assumed I needed another wire/rope because the sheaves are made for wire and would damage an all rope halyard. Is this wrong? Coquina C&C 35 MK I Joe Della Barba j...@dellabarba.com From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Neil Andersen via CnC-List Sent: Tuesday, May 15, 2018 9:36 AM To: cnc-list@cnc-list.com; cnc-list@cnc-list.com Cc: Neil Andersen <neil.eric.ander...@gmail.com> Subject: Re: Stus-List Time for new halyard... Recommendations? Bruce, First thing is to replace the wire/rope with all rope. Neil 1982 C&C32 Rock Hall, MD every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
