Got my replacement LEDs this year from MarineBeam also. Nice build and 
packaging.
I'll be trying out their new two wire Tricolor/anchor/strobe this season and a 
steaming/decklight combo too.


> On April 25, 2018 at 4:27 PM Ken Heaton via CnC-List <cnc-list@cnc-list.com> 
> wrote:
> 
>     Hi Charlie,
> 
>     I bought the following from Marine Beam and just put them into the 
> existing lights.  There are two types of retrofit LED's I used, one type is 
> just Warm White, the other switches between Red and Warm White.  Absolutely 
> no changes to the existing lights required, no wiring changes either, just 
> put them in and they work  Very nice light form them too.
> 
>     23-LED CONSTELLATION MATRIX FOR DOME LIGHTS (UN-DOME-23-WW)
>     SKU: BA-1156-23X-WW
>     * Base Type:  Single-Contact (BA15s)
> 
>     
> https://store.marinebeam.com/23-led-constellation-matrix-for-dome-lights-un-dome-23-ww/
> 
> 
>     RED/WHITE "SWITCHABLE" LED FOR DOME LIGHTS (UN-DOME-15-RWW)
>     SKU: UN-DOME-15-RWW 
>     Base Type: Single-Contact (BA15s)
> 
>     
> https://store.marinebeam.com/red-white-switchable-led-for-dome-lights-un-dome-15-rww/
> 
> 
>     We've had them for 4 or 5 years now, absolutely no issues.
> 
>     Ken Heaton & Anne Tobin
>     S/V Salazar - Can 54955
>     C&C 37/40 XL - Hull # 67
>     Cape Breton Island, Nova Scotia
> 
> 
>     On 25 April 2018 at 13:47, Charlie Nelson via CnC-List 
> <cnc-list@cnc-list.com mailto:cnc-list@cnc-list.com > wrote:
> 
>         > >         I need to replace all the cabin lights/fixtures on my 
> 36XL/kcb and am thinking of a white/red combo LED for all 0r some of them.
> >          
> >         I mostly race her so the lights don't get used very often. I want 
> > to get something that is relatively inexpensive, will not
> >         rust/tarnish (forget about the traditional brass stuff) and most 
> > importantly will work reliably after long periods of no use.
> >         They probably will be powered by the house 12V--I tried battery 
> > operated (in the housing) and these were a total waste of money
> >         since the batteries corroded faster than they lost their charge!
> >          
> >         I am talking about forward and aft cabin lights (~ 6 total) which 
> > mount to the ceiling with built in switches for on-off and white/red.
> >         The housings on these will be exposed--visible so that 'ribbon' 
> > type LEDs are out.
> >          
> >         In the main cabin, I need 4 that will be mounted under the 
> > 'shelves' and thus the housings are not important. I also need 2 that
> >         would be mounted in the forward cabin corners for reading and 2 in 
> > the 'ceiling', all of which would be exposed so the housing is important.
> >          
> >         I thought I might go with one source for consistency and maybe save 
> > some money. 
> >          
> >         I am looking for suggestions from the list before I decide.
> >          
> >         Thanks in advance, 
> >          
> >         Charlie Nelson
> >         1995 C&C 36 XL/kcb
> >         Water Phantom
> >          
> >          
> >          
> >         cenel...@aol.com mailto:cenel...@aol.com
> > 
> >         _______________________________________________
> > 
> >         Thanks everyone for supporting this list with your contributions.  
> > Each and every one is greatly appreciated.  If you want to support the list 
> > - use PayPal to send contribution --   https://www.paypal.me/stumurray 
> > https://www.paypal.me/stumurray
> > 
> > 
> > 
> >     > 
>     _______________________________________________
> 
>     Thanks everyone for supporting this list with your contributions. Each 
> and every one is greatly appreciated. If you want to support the list - use 
> PayPal to send contribution -- https://www.paypal.me/stumurray
> 
> 
 
_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Reply via email to