You'll be fine without sanding for your iniitial application. Remember apply a maintenance coat of Cetol Clear at least every 6 months. I lightly sand with 220-320 grit before each maintenance coat. However, you can also rough it a bit with a ScotchBrite pad or just wipe it with acetone.
Dennis C. Touche' 35-1 #83 Mandeville, LA On Wed, Feb 28, 2018 at 10:24 AM, David via CnC-List <cnc-list@cnc-list.com> wrote: > Sanded wood smooth. Added 3 coats of Cetol Teak. Surfaced roughed up a > bit as no sanding between coats. I want to add 3 coats of Cetol clear and > was told by their tech that is self leveling and surface will become > smooth. > > > I am so tired of sanding, but I would rather know now if I should sand > the surface smooth now (and presumably remove some coating) or move ahead > into Clear without sanding. > > > Practical experience please chime in. Thanks in advance. > > > > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > > >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
