Thanks Sent from my iPhone
> On Feb 17, 2018, at 4:35 PM, john sandford <johnsandf...@eastlink.ca> wrote: > > Zephyrworks > http://zephyrwerks.com/default.html > I replaced the aluminum main and jib halyard sheaves 2 years ago on my LF38 > As I changed from wire/rope to MLX dyneema I didn’t want the wire groove to > (maybe) damage the new ones. > They shipped new sheaves around in a week, and they fitted perfectly. > > Highly recommended. > > > > > > -----Original Message----- > From: Dave S [mailto:syerd...@gmail.com] > Sent: February-17-18 12:09 PM > To: C&c Stus List > Subject: Stus-List Masthead sheaves for 33-2? > > Good day all. > > Looking to replace windstar’s three masthead sheaves. The existing sheaves > are the originals, aluminum with a very shallow wire groove in the centre of > the rope-radius groove. I successfully re-bushed these a couple of years > ago, however I switched to all rope halyards last year and it appears the > main halyard is slightly fraying at the sheave. > > Will my current sheave damage the halyard? (The wire groove is very shallow > - hard to imagine it’s an issue) > > Suggestions as to a source? > > Thanks! > > Dave > > Sent from my iPhone > > _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
