What “quality product” have you found success with? Neil Andersen 1982 C&C 32 Rock Hall, MD
Neil Andersen 20691 Jamieson Rd Rock Hall, MD 21661 ________________________________ From: CnC-List <cnc-list-boun...@cnc-list.com> on behalf of robert via CnC-List <cnc-list@cnc-list.com> Sent: Friday, February 16, 2018 11:10:59 PM To: cnc-list@cnc-list.com Cc: robert Subject: Stus-List PSS Shaft Seal I would not change to a dripless stuffing box when a much simpler and safer option is available.....as David said here before, repack your existing box with a quality product and you are virtually drip free....I did mine 6 years ago and it still doesn't drip...and I have checked and there is no heat on the prop shaft, stuffing box, etc. I never worry about a catastrophic failure a PSS dripless stuffing box can endure. Rob Abbott AZURA C&C 32 - 84 Halifax, N.S. On Feb 16, 2018, at 9:05 PM, Brien Sadler via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote: Has anyone changed to a PSS dripless stuffing box? I’m sold on the switch I just haven’t figured out how I’m going to run the vent line yet. Any suggestions would be great. Preliminary plan is to run it to a very small through hull at the top of the transom. Thanks, Brien
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
