Actually, that's what we have now on our 37XL, they are hidden under the front outboard edge of the cockpit lockers lids and are teed into the line that drains the cockpit lockers.
Ken H. On 11 February 2018 at 10:04, Josh Muckley via CnC-List < cnc-list@cnc-list.com> wrote: > Pictures Bill, if you could please. > > Josh Muckley > S/V Sea Hawk > 1989 C&C 37+ > Solomons, MD > > On Feb 11, 2018 9:02 AM, "coltrek via CnC-List" <cnc-list@cnc-list.com> > wrote: > >> Or you can take a leap of faith, and cut a hole in the low spot of your >> deck, and put a little drain in there. I noticed all the newer models had >> deck drains in them, so I popped two in. I routed the drain hoses back to >> a T into the cockpit drains. >> >> Bill Coleman >> C&C 39 >> >> >> -------- Original message -------- >> From: bwhitmore via CnC-List <cnc-list@cnc-list.com> >> Date: 2/11/18 08:19 (GMT-05:00) >> To: cnc-list@cnc-list.com >> Cc: bwhitmore <bwhitm...@sbcglobal.net> >> Subject: Re: Stus-List Toe rail water drain >> >> I have used natural sponge cut & inserted in strategic spots for nearly >> 20 years. Really works well. Never tried the rope. >> >> >> >> Sent from Samsung tablet. >> >> >> -------- Original message -------- >> From: Jake Brodersen via CnC-List <cnc-list@cnc-list.com> >> Date: 2/10/2018 5:02 PM (GMT-05:00) >> To: cnc-list@cnc-list.com >> Cc: captain_j...@cox.net >> Subject: Re: Stus-List Toe rail water drain >> >> Christian, >> >> >> >> Water pooling on the side decks is an issue, along with the black streaks >> that seem to radiate from the toe rail. I have seen others use small >> pieces of sponge or cotton rope to let the water wick over the side. I >> would certainly try this before cutting into the toe rail. Give it a shot. >> >> >> >> Jake >> >> >> >> >> >> *Jake Brodersen* >> >> *C&C 35 Mk-III “Midnight Mistress”* >> >> *Hampton VA* >> >> [image: cid:image001.png@01D2F43E.567E4070] >> >> >> >> >> >> >> >> *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of >> *Christian >> Planton via CnC-List >> *Sent:* Saturday, February 10, 2018 16:03 >> *To:* cnc-list@cnc-list.com >> *Cc:* Christian Planton <plant...@wiltonps.org> >> *Subject:* Stus-List Toe rail water drain >> >> >> >> Hello everybody, >> >> >> >> I am going to rebed my deck hardware. When I do I'm thinking of rebedding >> the toe rail. Has anybody cut drain points into it so the water drains out. >> I was even thinking of cutting 1/8" plastic strips and in a couple of >> places "Lifting up" the toe rail to create a path for the water to drain. >> >> >> >> I get puddles aft on both sides of the cockpit. >> >> >> >> Any thoughts would be greatly appreciated. >> >> >> >> ChristianPlanton >> >> Peer Gyth >> >> C&C 34 1980 >> >> Saugatuck, CT >> >> >> >> >> >> Wilton Public Schools is transitioning e-mail systems. Effective >> immediately, please update your contact list to reflect the new e-mail >> address plant...@wiltonps.org. >> >> _______________________________________________ >> >> Thanks everyone for supporting this list with your contributions. Each >> and every one is greatly appreciated. If you want to support the list - >> use PayPal to send contribution -- https://www.paypal.me/stumurray >> >> >> > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > > >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
