This year it did leak but in past years fine.   I attribute this year to my not 
sealing sail track.


David F. Risch

(401) 419-4650 (cell)


________________________________
From: CnC-List <cnc-list-boun...@cnc-list.com> on behalf of Danny Haughey via 
CnC-List <cnc-list@cnc-list.com>
Sent: Tuesday, November 14, 2017 8:46 AM
To: David via CnC-List
Cc: Danny Haughey
Subject: Re: Stus-List Mast Boot Tape


David,

triad?  really?  they never do a s good job on mine, always leaks like crazy!

Danny

On 11/13/2017 6:26 PM, David via CnC-List wrote:

My boatyard used roofing tape.  Silicone seal the sail track at the tape and 
your good to go.  And its cheap too.


David F. Risch

(401) 419-4650 (cell)


________________________________
From: CnC-List 
<cnc-list-boun...@cnc-list.com><mailto:cnc-list-boun...@cnc-list.com> on behalf 
of Bruce Whitmore via CnC-List 
<cnc-list@cnc-list.com><mailto:cnc-list@cnc-list.com>
Sent: Monday, November 13, 2017 5:35 PM
To: cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>
Cc: Bruce Whitmore
Subject: Re: Stus-List Mast Boot Tape

Agreed as to sealing the slot, but the nice thing is on ours that the spar 
manufacturer thoughtfully filled the slot below the boom vang attachment, so it 
makes for a nice smooth penetration through the deck.

Still wondering about better tape options, though...

Bruce Whitmore

(847) 404-5092 (mobile)
bwhitm...@sbcglobal.net<mailto:bwhitm...@sbcglobal.net>


________________________________
From: Neil Andersen via CnC-List 
<cnc-list@cnc-list.com><mailto:cnc-list@cnc-list.com>
To: "cnc-list@cnc-list.com"<mailto:cnc-list@cnc-list.com> 
<cnc-list@cnc-list.com><mailto:cnc-list@cnc-list.com>; 
"cnc-list@cnc-list.com"<mailto:cnc-list@cnc-list.com> 
<cnc-list@cnc-list.com><mailto:cnc-list@cnc-list.com>
Cc: Neil Andersen 
<neil.eric.ander...@gmail.com><mailto:neil.eric.ander...@gmail.com>
Sent: Monday, November 13, 2017 3:22 PM
Subject: Re: Stus-List Mast Boot Tape

Also don’t forget that if you are keel stepped AND have a mast slot for slugs 
on your mainsail luff.  Darn near impossible to seal that channel with just the 
boot tape.

Neil Andersen
20691 Jamieson Rd
Rock Hall, MD 21661
________________________________
From: CnC-List 
<cnc-list-boun...@cnc-list.com><mailto:cnc-list-boun...@cnc-list.com> on behalf 
of Matthew L. Wolford via CnC-List 
<cnc-list@cnc-list.com><mailto:cnc-list@cnc-list.com>
Sent: Monday, November 13, 2017 3:13:03 PM
To: cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>
Cc: Matthew L. Wolford
Subject: Re: Stus-List Mast Boot Tape

Under “other solutions,” I use a Spartite plug at the partners which, in 
addition to holding the mast in place, also keeps water out.

From: Bruce Whitmore via CnC-List<mailto:cnc-list@cnc-list.com>
Sent: Monday, November 13, 2017 2:25 PM
To: C&C List<mailto:cnc-list@cnc-list.com>
Cc: Bruce Whitmore<mailto:bwhitm...@sbcglobal.net>
Subject: Stus-List Mast Boot Tape

Hello all,

I was wondering if some of you may have some insights regarding mast boot tape. 
 We have had a slight leak around the base of the mast since we bought the boat 
in February.  I pulled off a mass of old tape which was peeling anyway, and 
applied Rubbaweld Mast Boot Tape with somewhat marginal success (it was my 
first attempt). In that since I was doing the job single handed, I had to start 
by taping the end of the tape to the mast with duct tape to hold it while I 
pulled it tight.  I also found it was kind of a pain to have to pull off liner 
from the tape surface simultaneously while pulling on the tape hard enough to 
activate the adhesive and get it to bind.  It was also pretty difficult to get 
a good span from the base of the mast deck entrance to the mast itself, and I 
had difficulty getting the tape to fuse into a nice tight end.  In the end, the 
stuff appears to be about the same as what came off, which looked perpetually 
dirty.

I understand this is mostly an issue of user error, but It seems to me there 
must be a better solution.

For example, anyone ever try white shrinkwrap tape?  It would seem ideal - 
waterproof, sticks to boat hulls well, doesn't leave sticky residue, is UV 
resistant, and would stay much cleaner.

Any other solutions?

Bruce Whitmore

(847) 404-5092 (mobile)
bwhitm...@sbcglobal.net<mailto:bwhitm...@sbcglobal.net>
________________________________
_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   
https://www.paypal.me/stumurray<https://nam01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.paypal.me%2Fstumurray&data=02%7C01%7Cdavidrisch75%40msn.com%7C4639cde633aa4adc2dca08d52b66cc9d%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636462642875034020&sdata=1AHBOmUjeT%2BOZoSohWZmteX7WY5RHvV1XH08uCOzTUI%3D&reserved=0>

_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --  
https://www.paypal.me/stumurray<https://nam03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.paypal.me%2Fstumurray&data=02%7C01%7Cdavidrisch75%40msn.com%7Cd5517df565c44764d5fc08d52ae6eae0%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636462093624086286&sdata=xrN9nfqcCDxpOmVn6%2BZWPaUX7bpoRDaIGA56eTrH%2BR4%3D&reserved=0>






_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   
https://www.paypal.me/stumurray<https://nam01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.paypal.me%2Fstumurray&data=02%7C01%7Cdavidrisch75%40msn.com%7C4639cde633aa4adc2dca08d52b66cc9d%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636462642875034020&sdata=1AHBOmUjeT%2BOZoSohWZmteX7WY5RHvV1XH08uCOzTUI%3D&reserved=0>



_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Reply via email to