I used the 101/102 on my boat. Although it can be a struggle there are
some things that mike it a bit easier to deal with. the heat gun will
help it bend a bit tighter and also help it slide over the fittings.
heat the ends and use the liquid soap and it will slide on fittings
pretty easily. I think the toughest scenario is a tight bend onto a
fitting. I think it is good to have a good 6 to 8 inches of a straight
run into a fitting.
beyond that it is pretty straight forward. you need to be forceful
routing it and try not to bend it through any openings too tight.
you'll probably feel that you've had a bit of a workout in the end!
LOL I know I did!
I researched and researched hoses and the consensus was trident 101/102
for sanitation hose. I imagine every hose will have pros and cons. to
me, the deciding factors were recommendations from Peggie Hall and
Mainesail.
Danny.
On 11/6/2017 10:36 PM, Marek Dziedzic via CnC-List wrote:
Joel,
You may want to have a look at these two articles:
https://cdn.shopify.com/s/files/1/0419/9489/files/PS1312_War_Against_Head_Odors_2_reprint1404_web.pdf
(why it shows up as Shopify, I have no clue, but it is a Practical
Sailor’s review of sanitation hoses and it is a PDF, so you can keep
it. They say that Trident 101/102 is not necessarily the best option,
though it is the cheapest of the good ones. If you have tight corners,
Raritan might be a better option. Keep in mind that this article is a
bit dated (Dec 2013).
https://www.practical-sailor.com/blog/More-Great-Tips-for-Stopping-Boat-Stink-10852-1.html
- this is a bit of a guide that you probably want to read before you
start the project.
Marek
*From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of
*Joel Aronson via CnC-List
*Sent:* Monday, November 6, 2017 19:52
*To:* cnc-list@cnc-list.com
*Cc:* Joel Aronson <joel.aron...@gmail.com>
*Subject:* Re: Stus-List Sanitation hose and Y valves
Glad I asked! I’ll defer to the collective wisdom and go with the
101/102. I’ll borrow a small angle grinder to speed the process. This
is not a job I want to repeat!
The Raritan valve is worth a look too.
Joel
On Mon, Nov 6, 2017 at 6:37 PM Tom Buscaglia via CnC-List
<cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>> wrote:
We replaced the Y Valve on Alera this year. Went for the Raritan
Tru-Desoign Manual Aquavalve
https://www.fisheriessupply.com/raritan-tru-design-manual-aquavalve-y-valve-td90314w
<https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.fisheriessupply.com%2Fraritan-tru-design-manual-aquavalve-y-valve-td90314w&data=02%7C01%7Cdziedzicmj%40hotmail.com%7C66f3ade4cb6a464a11a108d52579d43e%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636456127535536767&sdata=LKvTOe0dCT0LmdGpP5XHBA5FSpz8RR0JDoGlZiq4cnw%3D&reserved=0>
Love it. Solid, positive and smoooth!
Our old Bosworth Y-Valve was shitty ;)
¤º°`°º¤,¸¸,¤º°`°º¤¤º°`°º¤,¸¸,¤º°`°º¤.
Tom Buscaglia
SV Alera
C&C 37+/40
Vashon Island WA
(206) 463-9200
www.sv-alera.com
<https://eur03.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.sv-alera.com%2F&data=02%7C01%7Cdziedzicmj%40hotmail.com%7C66f3ade4cb6a464a11a108d52579d43e%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636456127535536767&sdata=Q15N%2F8xlWkWcuPKLTV2yzx8PgG12wEhhVjsZ8%2Fbuo7o%3D&reserved=0>
At 01:21 PM 11/6/2017, you wrote:
Message: 2
Date: Mon, 6 Nov 2017 13:59:50 -0500
From: Joel Aronson <joel.aron...@gmail.com
<mailto:joel.aron...@gmail.com>>
To: "cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>"
<cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>>
Subject: Stus-List Sanitation hose and Y valves
Message-ID:
<cael16p-p_k3a1lp7b_rxayk+p-l24mcyyofiq8n3bp-vpxf...@mail.gmail.com
<mailto:cael16p-p_k3a1lp7b_rxayk%2bp-l24mcyyofiq8n3bp-vpxf...@mail.gmail.com>>
Content-Type: text/plain; charset="utf-8"
This winter I am going to replace the sanitation hose and Y
valves in both
heads.
Amazon has a 50 foot roll of 140 series Trident hose for
$150. Any reason
this is the wrong hose? Anyone in Annapolis want to split a
roll? (Beats
10/foot at the local stores)
Looking for recommendations on a Y valve. The bosworth seems
like a good
option. Anyone use them?
------------------------------
.
_______________________________________________
Thanks everyone for supporting this list with your contributions.
Each and every one is greatly appreciated. If you want to support
the list - use PayPal to send contribution --
https://www.paypal.me/stumurray
<https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.paypal.me%2Fstumurray&data=02%7C01%7Cdziedzicmj%40hotmail.com%7C66f3ade4cb6a464a11a108d52579d43e%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636456127535536767&sdata=BDAJjWWCFA674DlQU7sTGpqy2lxf1KP3w%2FPWMjRvJeA%3D&reserved=0>
--
Joel
301 541 8551
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray
