I am just about to start on the project to replace the teak and Holly cabin sole on Indigo. I have gleaned much info / advice from past postings on this list, but was wondering if anyone has prepared a "step by step" guide.
Things I need help on! 1) steps to ensure that the Holly lines up exactly for each piece. I recently asked, and was told I need 2 pieces of 4' x 8' to complete the job and allow the lines to match up - but I thought from past postings that 3 pieces are needed. Can someone who has done a 35mkiii confirm which? 2) best tool(s) to use to cut out the new pieces using the old boards as templates. Any tips / techniques to ensure accuracy and minimise damage to new veneer? 3) I know I should epoxy the underneath (and sides?) of the boards - how many coats are advised - can the first coat be "thin" to aid penetration into the plywood? 4) advice on what to use for the top surface - presumably a polyurethane varnish - preferred brand, number of coats recommended, what finish (matt, semi-gloss, gloss?) -- Jonathan Indigo C&C 35III SOUTHPORT CT _______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
