Denis

I use a cheap transfer pump operated by a drill.  Pumps 5 gals in a couple of 
minutes.  No more trying to for fuel through a funnel and no spills.  Can pump 
a jerry can dry, less than a tbsp.  Now you purist hush.  I'm pumping diesel.  
Been doing it for 4 years.

Mike
PERSUASION
C&C 37 K/CB
Long Sault

> On Sep 8, 2017, at 12:06 PM, Dennis C. via CnC-List <cnc-list@cnc-list.com> 
> wrote:
> 
> Touche' came with a decent fuel funnel with fine screen in the bottom.  I 
> think it's an old EZ-John funnel.  Used it for years but it is very slow.  
> Not fun holding a 5 gallon diesel can for 10 minutes while the fuel drains so 
> slow.
> 
> I bought one of the Mr. Funnel F3 fuel funnels.  While it passes the diesel 
> much quicker, you're left with a couple ounces of diesel in the funnel.  The 
> design is such that any water would be left in this small residual.
> 
> It's a pain to deal with that couple ounces left in the funnel's sump.  I 
> usually carefully remove the funnel, put the old funnel in the fill fitting 
> and pour it in there.  Now I'm left with two wet funnels.
> 
> I've searched the Internet for a fuel filter funnel that doesn't have the 
> water trapping sump design.  I see Mr. Funnel, Racor and others but they all 
> have the water trapping sump.
> 
> I'm about to mix up a batch of epoxy and fill the sump up to the bottom of 
> the filter screen but that seems like an aggressive solution.  I have a Racor 
> 500 to trap water so I'm not overly concerned about removing water.
> 
> Any slick ideas out there?
> 
> Dennis C.
> Touche' 35-1 #83
> Mandeville, LA
> _______________________________________________
> 
> This list is supported by the generous donations of our members. If you wish 
> to make a contribution to offset our costs, please go to:  
> https://www.paypal.me/stumurray
> 
> All Contributions are greatly appreciated!

_______________________________________________

This list is supported by the generous donations of our members. If you wish to 
make a contribution to offset our costs, please go to:  
https://www.paypal.me/stumurray

All Contributions are greatly appreciated!

Reply via email to