I didn’t have enough room to pour into the top of the strainer, so put a T in the input line. It has the benefit of being able to pump the bilge in an emergency.
Gary 30-1 From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of William Walker via CnC-List Sent: Saturday, August 5, 2017 9:01 AM To: cnc-list@cnc-list.com Cc: wwadjo...@aol.com Subject: Re: Stus-List Winterizing Diesel Engine Raw Water Ron, I just close the intake through hull, take the top off the strainer, and pour in antifreeze with engine running..done. Bill Walker CnC 36 Pentwater Mi Sent from AOL Mobile Mail _____ On Saturday, August 5, 2017 Ron Ricci via CnC-List <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> > wrote: Each year, I struggle with pulling a hose off my raw water strainer to flush anti-freeze through the system. I’ve considered installing a tee in the line. Recently I came across an adaptor (Sea Flush) that fits in the top of most any raw water strainer but it didn’t look like there was enough vertical clearance. There is an adaptor for a Groco strainer but my C&C 37+ with a Yanmar 3HM35F appears to have a Perko 0493 Size 5 strainer. I contacted Perko who indicated that I could convert my 0493 strainer to a 0593 model which has a flush valve and hose connection on the top. Unfortunately, it looks like I’d need about $250 worth of parts to make this work. I’ve heard that a second cap for the strainer could be modified by installing a hose fitting. The cap costs about $35. I’m curious what other listers have done and if I’m right on the strainer model #. Regards, Ron Ron Ricci S/V Patriot C&C 37+ Bristol, RI ron.ri...@1968.usna.com <mailto:ron.ri...@1968.usna.com> _______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
