Joe,
Thanks for the suggestions. I have pictures here to help http://www.demore.com/images/Water_Tank. I don’t think I can replace the tank, as it is the base of the settee, though I am open to suggestions. It isn’t an insert, it is all one piece, with a top that screws on, presumably with a gasket, though likely with caulk type sealant in the future, since I don’t have the gaskets. I thought there might be something to line the existing tank with, either a liquid material (paint?) or a flexible (rubber, silicone?) collapsible tank liner. Thanks again, Steve From: Joseph Bognar [mailto:jbog...@sympatico.ca] Sent: Tuesday, July 11, 2017 9:13 PM To: cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> Subject: Re: Stus-List C&C 30 MK1 General Questions I would replace the water tank and not take any chances with it . Some photos of your sette would help also. My 30 is of the 1979 vintage . I have an extra piece of plywood on top of the sette . It slides between the metal brackets and pulls out to make the bed a bit bigger to lay on . Sent from Joe Bognar On Jul 11, 2017, at 7:59 PM, Steven A. Demore via CnC-List <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> > wrote: Need some help/advice from some more experienced C&C people. I am rebuilding a ’73 30 MK1 project boat, that was started a few years ago by another person and abandoned along the way. I am focused on the settee area right now. First, I think I can get the mold cleaned out of the water tank, but it looks like there are some fine cracks in the bottom. Is there something that I can do to seal it up (paint, liner, ?) that would be safe for potable water? Second, the settee itself has a couple of metal brackets on the top that would keep cushions from sitting flat. Can somebody tell me how the settee goes together, i.e. is there a board on top or something? A picture might be helpful as well, since I am going to have to build whatever goes in there. I’m sure that I’ll have a lot more questions as this project commences, so thanks in advance! Steve SV Doin’ It Right 1973 C&C 30 MK1 Pasadena, MD _______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
