I also went with plexi (two pieces). A little heavier than wood, but no complaints. My 34 had teak, which looked nice and weighed a little less – however, plexi does not need to be maintained.
From: Tim Sippel via CnC-List Sent: Thursday, July 13, 2017 9:25 AM To: cnc-list@cnc-list.com Cc: Tim Sippel ; Raymond Macklin Subject: Re: Stus-List 1985 - CNC 33 Replacement Companionway Door I sourced out a piece of plexi-glass and cut it myself (there is a special jigsaw blade that cuts up and down and avoids “melting” the cut .) Pretty cheap .. Tim Matico C&C 33 mk ii From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Raymond Macklin via CnC-List Sent: July 13, 2017 9:19 AM To: cnc-list@cnc-list.com Cc: Raymond Macklin <ray.mack...@gmail.com> Subject: Stus-List 1985 - CNC 33 Replacement Companionway Door I am needing to replace my companionway door on my 33. Does anyone know where I might find one to purchase or suggestions on how to replace it. Thanks, Ray Macklin LakeHouse Milwaukee, WI -------------------------------------------------------------------------------- This communication is confidential. We only send and receive email on the basis of the terms set out at www.rogers.com/web/content/emailnotice Ce message est confidentiel. Notre transmission et réception de courriels se fait strictement suivant les modalités énoncées dans l’avis publié à www.rogers.com/aviscourriel -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- _______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
