I thought that little door was to pass beers to the skipper while he's working
in the locker ;)
On Sunday, July 9, 2017 12:51 PM, Dave S <syerd...@gmail.com> wrote:
Thanks Doug - sorry to hear about the heat. If heat in the locker is
contributing to the overheating (if.... ) then you have other issues. You can
check the hose to the strainer from there.Weeds if any would be caught in the
strainer, for sure check that. If you are not getting much water through to the
exhaust, you may be able to hear it. Sounds less muffled. Mine gets loud -
(like jimmy page. ) Check your water pump belt tension. (Btdt) When mine
overheAts a light goes off and an alarm sounds. Hope that helps. On a hot day
(once at the dock) I lift the locker lid a bit and open the little trap door
in the galley. Lets water heater, fridge and engine heat out. Yes, the design
is less than ideal for shedding unwanted heat. Hope that helps.
Sent from my iPhone
On Jul 9, 2017, at 10:17 AM, Doug Welch <doug.we...@rogers.com> wrote:
We took a week and headed east (Trentport and back) and gradually loaded up the
locker. Motor sailing on the return leg from Trenton to Cobourg the engine
overheated. Fortunately the wind gods took pity on us and the wind piped up. We
sailed for a couple of hours while the motor cooled. My wife sailed while I
checked the impeller. It was in perfect shape. We unloaded the locker and the
motor ran fine on the rest of our return to Frenchman's Bay. I think the
overloading of the locker contributed to or was the cause of the overheating.
My wife thinks we sucked up some weeds (we used the small boat channel going
from Trenton to the Murray Canal). I am going to be more careful with what I
place in the locker. I am still going to get more storage with the partition I
installed but am going to avoid putting things like fenders, my code 0, etc. in
the locker that will restrict air flow.
Long windy entry but I do have a few questions for the group
My engine panel seems to a warning light for high temp that doesn't work. Do
these lights work? (assuming the bulb works)
Do you think the overheating was caused by filling the locker?
Has anyone installed additional ventilation in the locker? It seems like it
would be relatively easy to install a vent and perhaps a small 12v fan to keep
the air moving
Dave, We ended up overnighting at the marina the Thursday before Canada Day
and was just down the dock from you. Your boat is looking good.
Cheers, Doug WelchCeltic Knot85 33-2 c/b
On Sunday, June 25, 2017 9:07 PM, "syerd...@gmail.com" <syerd...@gmail.com>
wrote:
Verrry interesting..... your refrigeration unit is in a completely
different location. Windstar has a plywood separator dividing the two spaces,
but it's only a foot high at its tallest. I was thinking after reading this
thread to make a machine guard to cover the rotating parts, essentially leaving
what I have intact. Was in FB on Saturday, didn't think to look for you.
Should have studied your boat more when you visited!Btw, Canada day and harbour
day festivities are combined next weekend in Whitby. Lots going on, probably
the best weekend to visit if you can get a slip. (I'm still on pier 7)
Dave.
Sent from my iPad
On Jun 25, 2017, at 7:02 PM, Doug Welch <doug.we...@rogers.com> wrote:
Done
C&C 33-2 Cockpit Locker Separator
|
|
|
| | |
|
|
|
| |
C&C 33-2 Cockpit Locker Separator
By Imgur Imgur: The most awesome images on the Internet. | |
|
|
On Thursday, June 8, 2017 9:44 AM, doug.welch--- via CnC-List
<cnc-list@cnc-list.com> wrote:
Thanks all for your input and ideas. I will share the solution I implement on
Sent from Yahoo Mail on Android
On Wed, 7 Jun 2017 at 6:41 PM, Tortuga via CnC-List<cnc-list@cnc-list.com>
wrote: On my 30, I use a piece of fishing net stretched between broom handles.
I can drop the top handle to access the engine compartment. I try not to stow
anything in the lazarette that is small enough to go through the net. So far so
good.
https://1drv.ms/i/s!AkpvkGQ7RaWRhvUpERLYFLJ4uYH1gQ
Derek Kennedy1979 C&C 30 mk1- TortugaBallantyne's Cove, NS
_______________________________________________
This list is supported by the generous donations of our members. If you wish to
make a contribution to offset our costs, please go to:
https://www.paypal.me/stumurray
All Contributions are greatly appreciated!
_______________________________________________
This list is supported by the generous donations of our members. If you wish to
make a contribution to offset our costs, please go to:
https://www.paypal.me/stumurray
All Contributions are greatly appreciated!
_______________________________________________
This list is supported by the generous donations of our members. If you wish to
make a contribution to offset our costs, please go to:
https://www.paypal.me/stumurray
All Contributions are greatly appreciated!
