As an owner of a 1986 44 I am very interested in the results of the survey on your 44. I have had mine for 10 yrs and all is good. Feel free to ask me questions.
Fred Hazzard S/V Fury C&C 44 Portland, Or On Jul 1, 2017 7:36 PM, "Dan via CnC-List" <cnc-list@cnc-list.com> wrote: > I already did that on the hull and it sounds good and crisp. The topsides > are hard to read because many areas are only 8-12 inches wide and you don't > get the same sounds from those spots. The wider flatter sections sounded ok > though. > > Dan > > On Sat, Jul 1, 2017 at 11:20 PM, Josh Muckley via CnC-List < > cnc-list@cnc-list.com> wrote: > >> You could take a plastic mallet for yourself and percussion test in key >> locations. >> >> Josh >> >> On Jul 1, 2017 10:17 PM, "Dan via CnC-List" <cnc-list@cnc-list.com> >> wrote: >> >>> Thanks Josh, that's what I suspected. The boat was well cared for and >>> installs were all done by pros (I was told) so I should be ok to push ahead >>> with the survey and hopefully become an owner like you guys :) >>> >>> On Sat, Jul 1, 2017 at 11:06 PM, Josh Muckley via CnC-List < >>> cnc-list@cnc-list.com> wrote: >>> >>>> C&C designed solid areas for through-hulls and transducers but any >>>> aftermarket stuff may not have been installed in those locations. >>>> >>>> Josh Muckley >>>> S/V Sea Hawk >>>> 1989 C&C 37+ >>>> Solomons, MD >>>> >>>> On Jul 1, 2017 10:04 PM, "Dan via CnC-List" <cnc-list@cnc-list.com> >>>> wrote: >>>> >>>> Sorry if this was sent twice - the first time I tried it I was not >>>> registered but had no responses... >>>> >>>> I'm looking at a 1986 C&C 44 to buy. Before I get into paying for a >>>> survey to check the core out with a moisture meter I'm wondering if any 44 >>>> owners out there have had any problems with wet core? - when you remove >>>> through hull fittings is the core isolated with solid glass to prevent >>>> egress or can you visibly see the balsa core layer? >>>> >>>> _______________________________________________ >>>> >>>> This list is supported by the generous donations of our members. If you >>>> wish to make a contribution to offset our costs, please go to: >>>> https://www.paypal.me/stumurray >>>> >>>> All Contributions are greatly appreciated! >>>> >>>> >>>> >>>> _______________________________________________ >>>> >>>> This list is supported by the generous donations of our members. If you >>>> wish to make a contribution to offset our costs, please go to: >>>> https://www.paypal.me/stumurray >>>> >>>> All Contributions are greatly appreciated! >>>> >>>> >>> >>> _______________________________________________ >>> >>> This list is supported by the generous donations of our members. If you >>> wish to make a contribution to offset our costs, please go to: >>> https://www.paypal.me/stumurray >>> >>> All Contributions are greatly appreciated! >>> >>> >> _______________________________________________ >> >> This list is supported by the generous donations of our members. If you >> wish to make a contribution to offset our costs, please go to: >> https://www.paypal.me/stumurray >> >> All Contributions are greatly appreciated! >> >> > > _______________________________________________ > > This list is supported by the generous donations of our members. If you > wish to make a contribution to offset our costs, please go to: > https://www.paypal.me/stumurray > > All Contributions are greatly appreciated! > >
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
