Thanks Josh and all,
Very helpful.  I can rest my anxious mind now...  

:^)  
 Bruce Whitmore

(847) 404-5092 (mobile)
bwhitm...@sbcglobal.net


      From: Josh Muckley via CnC-List <cnc-list@cnc-list.com>
 To: C&C List <cnc-list@cnc-list.com> 
Cc: Josh Muckley <muckl...@gmail.com>
 Sent: Tuesday, June 27, 2017 1:50 PM
 Subject: Re: Stus-List Zinc in heat exchanger, Yanmar 3JH2e
   
The heat exchangers are made of a copper-nickel alloy which is also commonly 
used for all types of saltwater interfaces in the power generation and military 
industries.  No anodes are required.  Anodes are required in a raw water cooled 
engine because there is no way to prevent the saltwater from touching the cast 
iron engine blocks.  Similarly in the military and industrial heat exchangers 
the shells are made of carbon steel and as a result anodes are attached at 
those locations.
As for our freshwater cooled engines the cast iron is protected by the cocktail 
of chemical additives in the glycol coolant.  The coolant also has lubricants 
to help protect the waterpump shaft seals.
In the freshwater versions of our engines the block is exactly the same as the 
raw water counterparts.  The anode ports are simply plugged with a screw in 
pipe plug.  This provides an opportunity to install a block heater to keep 
condensation from accumulating during the off season.
I had stuck rings one year and I've kept a block heater ever since with no 
recurrence of the stuck rings. 
Zerostart 310-0003 Engine Block Heater 
https://www.amazon.com/dp/B002UNASYS/ref=cm_sw_r_cp_apa_iOPuzb6CAMJER

Josh MuckleyS/V Sea Hawk1989 C&C 37+Solomons, MD



On Jun 27, 2017 8:52 AM, "Bruce Whitmore via CnC-List" <cnc-list@cnc-list.com> 
wrote:

Hello all,
I think I know the answer to this question, but I just want to confirm.  On a 
Yanmar 3JH2E, are there any sacrificial anodes in the heat exchanger or 
anywhere else to replace?
I've checked the repair manual for the engine, but found nothing.
Just wanting to be sure... Bruce Whitmore1994 C&C 37/40+, "Astralis"Madiera 
Beach, FL
(847) 404-5092 (mobile)
bwhitm...@sbcglobal.net

______________________________ _________________

This list is supported by the generous donations of our members. If you wish to 
make a contribution to offset our costs, please go to:  https://www.paypal.me/ 
stumurray

All Contributions are greatly appreciated!


_______________________________________________

This list is supported by the generous donations of our members. If you wish to 
make a contribution to offset our costs, please go to:  
https://www.paypal.me/stumurray

All Contributions are greatly appreciated!


   
_______________________________________________

This list is supported by the generous donations of our members. If you wish to 
make a contribution to offset our costs, please go to:  
https://www.paypal.me/stumurray

All Contributions are greatly appreciated!

Reply via email to