Hi Greg,
You can research the righting moment, at say 30 - 33 degrees, for
various boats in your size range for a second opinion. The 33-2 is
similar in stability to my 35 mk-1(check diagram in the Technical
Info on Stu's CNC site).
I put the load at about 10,000 lbs, so building for 12 - 15,000 lbs
is not a unreasonable. If you're going with aluminum only then I
would spec it at 20,000 for a 50% corrosion allowance and say, "I
expect this to last another 20 years."
BTW, check with Rich Knowles on my credentials, if in doubt. :)
Hi Rich, we miss you on the Left Coast.
Cheers, Russ
Sweet 35 mk-1
At 03:15 AM 26/06/2017, you wrote:
Does anyone know what the maximum load would be on the mast step of
the 33? I'm trying to figure out the psi force for a rebuild
Thanks!
Greg
33-2
Halifax
_______________________________________________
This list is supported by the generous donations of our members. If
you wish to make a contribution to offset our costs, please go
to: https://www.paypal.me/stumurray
All Contributions are greatly appreciated!
_______________________________________________
This list is supported by the generous donations of our members. If you wish to
make a contribution to offset our costs, please go to:
https://www.paypal.me/stumurray
All Contributions are greatly appreciated!
