Thanks Dave. I have the hose coming from the ice box and the clamps where the
pump was affixed to the side, so I suspect my was plumbed the same way and I
just have to replace the pump.
I notice your intake set up is the same as mine with a tee, two valves with one
running through a filter. What is the purpose of this set up? Do the different
valves draw from differnt locations?
ThanksDoug
On Sunday, June 11, 2017 9:56 AM, Dave S via CnC-List
<cnc-list@cnc-list.com> wrote:
All, I have posted some photos - of interest may be the factory location of
the Beckson Siphonmate pump, (in windstar, 1985 33-2) as well as Lee's dual
footpump repurpose..
http://cncwindstar.blogspot.ca/2017/06/how-to-drain-ice-box.html
Dave
_______________________________________________
This list is supported by the generous donations of our members. If you wish to
make a contribution to offset our costs, please go to:
https://www.paypal.me/stumurray
All Contributions are greatly appreciated!
_______________________________________________
This list is supported by the generous donations of our members. If you wish to
make a contribution to offset our costs, please go to:
https://www.paypal.me/stumurray
All Contributions are greatly appreciated!
