It isn’t like or dislike, it is the boat physically cannot get into my marina.
Joe Della Barba j...@dellabarba.com <mailto:j...@dellabarba.com> Coquina C&C 35 MK I From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Andrew Burton via CnC-List Sent: Tuesday, May 30, 2017 10:54 PM To: cnc-list@cnc-list.com Cc: Andrew Burton <a.burton.sai...@gmail.com> Subject: Re: Stus-List C&C 40 for sale I asked Rob Ball about doing that to my deep draft 40 and he replied something to the effect of, "if I'd thought it was a good idea, I would have designed the boat that way!" I'd love to have a shallower boat, but I'd hate to lose the wonderful way she sails. Sailing wins! It's like a fellow who would love it if his wife was calmer, but a lobotomy would take away all the stuff he loves too. Andy C&C 40 Peregrine Andrew Burton 61 W Narragansett Newport, RI USA 02840 http://sites.google.com/site/andrewburtonyachtservices/ +401 965-5260 On May 30, 2017, at 21:27, Rick Brass via CnC-List <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> > wrote: I had the keel on Imzadi reduced from 6’1” to 5’6”, and installed a torpedo made by Mars Metals. Back when I had it done, the cost was about $3600. Mars was making the keels for Benneteau in South Carolina, and they shipped my bulb on the back of a load going to Benneteau so shipping was cheap. I expect that the same bulb would be more now because lead is more expensive. Ditto the scrap value of the lead block you cut off. We cut the keel with a chainsaw, weighed it and reported the weight to Mars, they sent me a bulb that fit the profile of the keel and bolted in place with ½” carriage bolts they supplied. IIRC, the lost keel weighed 850 pounds and the bulb weighed 1150 (or something like that). The boat still points well and NCPHRF gave me 6 seconds for shortening the keel. Rick Brass Washington, NC From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Bruno Lachance via CnC-List Sent: Tuesday, May 30, 2017 4:33 PM To: cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> Cc: Bruno Lachance <bruno_lacha...@hotmail.com <mailto:bruno_lacha...@hotmail.com> > Subject: Re: Stus-List C&C 40 for sale I saw a few C&Cs with draft réductions around here. Mars metal, who i understand produced the keels for most of our boats, have the templates, datas and know how to produce a bulb in two sections that you can bolt to the reduced keel and fair. A kind of DIY kit. You can cut the keel with a chainsawand they will calculate the weight of the bulb to compensate for the loss. they should also advise you if you are going too far, from what i heard they have a good knowledge of our boats. https://marskeel.com/ <https://marskeel.com/> <https://marskeel.com/> MarsKeel |Production Lead Keels for the Sailboat Industry marskeel.com <http://marskeel.com> For 35 years Mars Keel Technology has united its passion for sailing & vast technical experience to supply quality keels to builders & sailors worldwide The shipping will be expensive! Bruno Lachance Bécassine, 1987 33 mkII (will splash this thuesday!) New-Richmond, Qc _____ De : CnC-List <cnc-list-boun...@cnc-list.com <mailto:cnc-list-boun...@cnc-list.com> > de la part de Danny Haughey via CnC-List <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> > Envoyé : 30 mai 2017 16:11 À : cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> Cc : Danny Haughey Objet : Re: Stus-List C&C 40 for sale The yard I was at in westport did it on a C&C 41 I looked at On 5/30/2017 4:10 PM, Andrew Burton via CnC-List wrote: The guy with the 40 for sale in the Rio Dulce did it...with success he says. Andy C&C 40 Peregrine Andrew Burton 61 West Narragansett Ave Newport, RI USA 02840 +401 965 5260 On May 30, 2017, at 15:59, Della Barba, Joe via CnC-List <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> > wrote: Anyone know how hard it is to saw a foot or two off the keel? 6 feet is the absolute max for me. Joe Coquina From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Joel Aronson via CnC-List Sent: Tuesday, May 30, 2017 11:24 AM To: cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> Cc: Joel Aronson <joel.aron...@gmail.com <mailto:joel.aron...@gmail.com> > Subject: Stus-List C&C 40 for sale Saw this listing: https://annapolis.craigslist.org/boa/6153505462.html Don't know the boat. -- Joel 301 541 8551 _______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated! _______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated! _______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!