FYI:
I got some Prism polish for my stainless steel grill. One of my old cars has 
foggy headlights that nothing seemed to fix, so I figured nothing to lose and 
the Prism stuff did GREAT on the headlights.
(also did great on the grill)
Joe
Coquina

From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of BillBinaList 
via CnC-List
Sent: Friday, May 12, 2017 5:47 AM
To: cnc-list@cnc-list.com
Cc: BillBinaList <billbinal...@gmail.com>
Subject: Re: Stus-List Fogged, Scratched Plexiglass - Good home test, now to 
try it on our companionway hatches...


Just be aware that any scratch Resistance and UV protective coatings will be 
removed. Maybe try just the plastic headlight polish by itself first. That may 
be enough for a decent improvement. I would also caution against using any 
compound that is not specifically for plastic. Automotive compounds and waxes 
have petroleum solvents that will attack plastic in a way that cannot be fixed.

Bill Bina

On 5/11/2017 10:01 PM, Bruce Whitmore via CnC-List wrote:
Hello all,

Our 37/40+ has tinted plexiglass sliding companionway hatches that look fogged 
and lightly scratched all over from years of sun.  After reading here and other 
places about potential ways of curing the issue, I ran a test here at home.  I 
have a Ryobi Corner Cat, and grabbed a piece of scrap plexiglass.  Starting 
with 360 wet/dry sandpaper, I wet sanded the nice new piece of plexi until it 
looked like $#!+.  Then followed with 600, 1200 and 2000, then went to buffing 
compound, and finally to McGuire's polish for headlights.

Sure enough, the piece of plexiglass came out really nice & clear.

So, I think I'll try it on the sliding hatchboards unless someone here cautions 
me otherwise.

What say you wise folks?

Bruce Whitmore

(847) 404-5092 (mobile)
bwhitm...@sbcglobal.net<mailto:bwhitm...@sbcglobal.net>




_______________________________________________



This list is supported by the generous donations of our members. If you wish to 
make a contribution to offset our costs, please go to:  
https://www.paypal.me/stumurray



All Contributions are greatly appreciated!

_______________________________________________

This list is supported by the generous donations of our members. If you wish to 
make a contribution to offset our costs, please go to:  
https://www.paypal.me/stumurray

All Contributions are greatly appreciated!

Reply via email to