I put a waterproof switch at the helm near the control panel - advantage is being in a spot where it is easy to pump while underway - which is a requirement in our waters. It is momentary type too - avoids accidently leaving it running. Also makes it easy to see the pump is operating, when the tank is empty, etc Cheers
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of T power via CnC-List Sent: Monday, May 08, 2017 2:53 PM To: Indigo via CnC-List Cc: T power Subject: Stus-List macerator switch I currently have a maceration pump that has a momentary switch located next to it under the sink. I believe this was installed by the previous owner. I would like some opinions on the best place to install the new switch. Is it common to have the CB on the distribution panel handle this operation or is it better to have a separate switch near the head. I'm thinking near the head, but I could be wrong. There is no shower so I think water will not be a concern. Thanks. Tom C&C 30 MK1 Invictus Sent from Outlook <http://aka.ms/weboutlook>
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
