I'm not sure I saw a reply to you latest question. Stand auto parts store heater hose is what I did. Bruce1994 37/40+
Sent from Samsung tablet. -------- Original message -------- From: Danny Haughey via CnC-List <cnc-list@cnc-list.com> Date: 5/7/2017 10:02 AM (GMT-05:00) To: cnc-list@cnc-list.com Cc: Danny Haughey <djhaug...@juno.com> Subject: Re: Stus-List Water heater Mystery Hi All, I was able to pressurize both the tank, 40psi for about an hour, and the coil, 10lbs for about 45 minutes, the only leaking I could detect was at the hose clamps. So, I think I'm good to go. I already bought new elements, one as a spare. I'm going to replace the engine side hose with heater hose. I looked into the clear silicone but, I'm not sold on it for the price. Is there any particular brand hose I should be looking at or is the stuff you an get at the autoparts store what I should use. I could pick that up now and have this wrapped up today. Danny ---------- Original Message ---------- From: Joel Aronson via CnC-List <cnc-list@cnc-list.com> To: "cnc-list@cnc-list.com" <cnc-list@cnc-list.com> Cc: Joel Aronson <joel.aron...@gmail.com> Subject: Re: Stus-List Water heater Mystery Date: Tue, 2 May 2017 12:07:59 -0400 Danny, That is not heater hose. I would see if it is temperature rated for 180 degree water! I just bought a 50 foot roll from Amazon because it was cheaper than 15 feet at West. If you were nearby, I'd give you the rest. Yes, I'd hook up a hose and see if there is a leak. They likely bypassed it for a reason. Joel Virus-free. www.avg.com On Tue, May 2, 2017 at 11:56 AM, Danny Haughey via CnC-List <cnc-list@cnc-list.com> wrote: Hello all, Well, In the fall of 2015, when we were in the process of buying our boat, the water heater was hooked up and tripping the shore power breaker at the survey. Surveyor said, it's probably just the element. There is a loop in the engine for the piping to the coil heat exchanger inside the water heater. This was hooked at inspection. Well, as i needed some repairs done for the delivery home, I hired the yard where she spent 26 of her 30 years to fix a few things. Drain the old fuel, replace filters, replace some gauges, repair the toilet. Well, after I got the boat home I realized they had completely disconnected and bypassed the heat exchanger tubing from the water heater to the engine and never said anything to me about. I called and called and called to try and find out why but, they simply refused to return my call. My question now is, should i just hook it back up and see what the issue is? Here is a pic at survey. https://1drv.ms/i/s!Al8x-ET7_b7Mn1uGbsxTIdKR5WX3 You can see where nylon reinforced hose is attached. Now, those two connections are by passed. I guess I could hook up a pump and pump water through the heat exchanger and see if anything horrible happens that way. Then, at least, i wouldn't get antifreeze all over the place. Anyway, any insights, advice or observations will be great appreciated! Danny Mattapoisett, Ma _______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated! -- Joel 301 541 8551
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!