Go Pats!!! Harry Sent from my iPhone 8 beta
> On May 4, 2017, at 11:10, David Kaseler via CnC-List <cnc-list@cnc-list.com> > wrote: > > Kind of like under inflating footballs just a little. > Dave. > SLY 1975 C&C 33 > > Sent from my iPad > >> On May 3, 2017, at 7:56 PM, Dennis C. via CnC-List <cnc-list@cnc-list.com> >> wrote: >> >> No problem. Hack saw, bosun chair and poof! Shorter spreaders. :) >> >> Seriously, could be a very subtle cheat for one design or PHRF. The 35-1 >> class bylaws specify 3' 10.5" for spreader length. Who would notice a >> couple inches whacked off? >> >> Dennis C. >> >>> On Wed, May 3, 2017 at 9:40 PM, Rick Brass via CnC-List >>> <cnc-list@cnc-list.com> wrote: >>> I really hate to be a nay sayer about anything in Sail magazine, but the >>> last racing headsail I had made (a deck sweeper carbon fiber 155) was >>> designed to be trimmed 4-6” off the upper spreader when hard on the wind – >>> and the sail maker set the nominal sheet leads for 11 degrees sheeting >>> angle. >>> >>> >>> >>> The process shown in the article (7 degrees for a 150 and 10 degrees for an >>> 85) is fine for determining the forward and aft positions of the ends of >>> the genoa track, and hence the track length. But your sailmaker will >>> probably have a specific placement for the genoa car within that length of >>> track depending on the shape of the sail and the width of your rig – among >>> other things. >>> >>> >>> >>> >>> >>> Rick Brass >>> >>> Imzadi C&C 38 mk 2 >>> >>> la Belle Aurore C&C 25 mk1 >>> >>> Washington, NC >>> >>> >>> >>> >>> >>> >>> >>> From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of RANDY >>> via CnC-List >>> Sent: Wednesday, May 03, 2017 11:49 AM >>> To: cnc-list <cnc-list@cnc-list.com> >>> Cc: RANDY <randy.staff...@comcast.net>; cnc-list <CnC-List@cnc-list.com> >>> Subject: Re: Stus-List Sail advice - 1, 2 , 3 go >>> >>> >>> >>> And I'll be measuring and setting sheeting angles a la >>> http://www.sailmagazine.com/racing/regattas/headsail-sheeting/ once I get >>> the time. >>> >>> >>> >>> Cheers, >>> >>> Randy Stafford >>> >>> S/V Grenadine >>> >>> C&C 30-1 #7 >>> >>> Ken Caryl, CO >>> >>> >>> >>> >>> >>> >>> _______________________________________________ >>> >>> This list is supported by the generous donations of our members. If you >>> wish to make a contribution to offset our costs, please go to: >>> https://www.paypal.me/stumurray >>> >>> All Contributions are greatly appreciated! >>> >> >> _______________________________________________ >> >> This list is supported by the generous donations of our members. If you wish >> to make a contribution to offset our costs, please go to: >> https://www.paypal.me/stumurray >> >> All Contributions are greatly appreciated! > _______________________________________________ > > This list is supported by the generous donations of our members. If you wish > to make a contribution to offset our costs, please go to: > https://www.paypal.me/stumurray > > All Contributions are greatly appreciated!
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
