I installed an Isotherm Compact Classic GE 150 in my ice box a few years ago. I put the compressor in the locker next to the stove (under the seat). I drilled a hole in the forward side of the ice box, and injected foam in the space for extra insulation. I also cut a piece of two-inch closed cell foam and glued it to the underside of the top of the ice box. I can send you pictures, If you'd like.
Alan Bergen 35 Mk III Thirsty Rose City YC Portland, OR On Mon, Apr 17, 2017 at 6:47 PM, Chuck Saur via CnC-List < cnc-list@cnc-list.com> wrote: > I recall discussion about this, but could not find the thread. > > I'm looking into icebox conversion for spring, and wondering if anyone has > recommendations? Not sure the advantages with water-cooled v. fan cooled, > except the heat buildup in the locker with compressor heated air. Other > considerations? Reliability? The obvious loss of valuable space in box for > cold plate...etc? single v. dual power? (12 volt or 12/120 volt). Would > really appreciate comment, and/or link to previous topic discussion. > Thanks... > > > *Chuck Saur* > *C&C 35-3 (1985)* > > *Morning Sky* > > (517)-490-5926 > > _______________________________________________ > > This list is supported by the generous donations of our members. If you > wish to make a contribution to offset our costs, please go to: > https://urldefense.proofpoint.com/v2/url?u=https-3A__www. > paypal.me_stumurray&d=DwICAg&c=clK7kQUTWtAVEOVIgvi0NU5BOUHhpN > 0H8p7CSfnc_gI&r=9w3G7Cf8YfQnrjmtuNxwDJYr3JMv9f1pAfgAJ9xXYQQ&m= > HwkxHXJrBoBCFXrDKRUOCeqclOJMOqfgbmgaVrl7ho4&s= > 5LakAFiHmUX6jI3KnIbTObsNFBRSoSjyB9UVOevNU9M&e= > > All Contributions are greatly appreciated! > > -- Alan Bergen 35 Mk III Thirsty Rose City YC Portland, OR
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
