On Mon, Apr 10, 2017 at 1:03 PM, Steven Tattrie via CnC-List < cnc-list@cnc-list.com> wrote:
> > Does any one with tracks have interference with the shrouds? I am > thinking, when the wind pick up you want to flatten the foot, visually > looks like the shroud would restrict sail shape. any comments? > Steve, My 35-1 has a jib track near the shrouds. The sheet for my 95% blade trims between the forward lower and upper shrouds. Pics can be seen here: https://drive.google.com/open?id=0B_sb5TfIENvsNll4b3ZwM1B4a28 I use this track until about 22-24 knots. Above that the sheet moves to the toe rail to increase the sheeting angle to reduce heel. Larger sails trim to a genoa track aft of the shrouds. Can be seen in the same Drive folder. One factor in locating genoa and jib tracks is interference from the interior cabinetry. Dennis C. Touche' 35-1 #83 Mandeville, LA
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
