That explains it. Thanks,
Alex Giannelia a...@airsensing.com (416) 203-9858 -----Original Message----- From: Ron Ricci [mailto:ron.ri...@1968.usna.com] Sent: February-26-17 7:57 AM To: cnc-list@cnc-list.com Cc: Alex Giannelia Subject: RE: Stus-List GFCI outlets Alex, Technically the outlets are not in parallel. The first outlet is connected to the incoming line using terminals marked "LINE". The second outlet is wired to the terminals marked "LOAD". Subsequent outlets are wired in parallel with the second outlet. When the "TEST" button is pushed on the GFCI outlet, you should hear a click and all outlets on the circuit should be dead. If wired incorrectly, the GFCI will only kill the first (itself) outlet and others will still be live. Regards, Ron Ron Ricci S/V Patriot C&C 37+ Bristol, RI -----Original Message----- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Alex Giannelia via CnC-List Sent: Sunday, February 26, 2017 7:26 AM To: cnc-list@cnc-list.com Cc: Alex Giannelia Subject: Stus-List GFCI outlets So after reading all the responses, I am left with one question: If you have for example 3 outlets in parallel and one of them is GFCI, why does it have to be the "first in line" to your incoming shore feed? Or does it matter? Thanks, Alex Giannelia a...@airsensing.com (416) 203-9858 _______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
