Hi Greg, Just read your C&C list-serve entry about a bow roller for your 35 mkII. I am also very interested in adding one to Cat’s Paw. I am curious where you are having the roller made. Is it Holland Marine? Another lister had one made there, and HM built me a great stern ladder a couple of years ago. If not Holland Marine, do you have a manufacturer you would recommend? Thanks for your advice, Eric Cat's Paw C&C 35 Mk II Mattapoisett, MA
> ---------- > > Message: 4 > Date: Tue, 7 Feb 2017 21:12:16 -0500 > From: "Greg Swetka" <swe...@att.net> > To: <cnc-list@cnc-list.com> > Subject: Stus-List C&C 35mkII Windlass > Message-ID: <001401d281b0$c59e0360$50da0a20$@att.net> > Content-Type: text/plain; charset="us-ascii" > > I am having a new stemhead fitting with bow roller fabricated this winter > for Piper. My next step, is looking into a windlass for Piper, as the new > anchor that I purchased is a 35lb Lewmar Delta and I'm not as young as I > used to be. I really like the looks of the low profile Lewmar windlasses but > am not sure if they will work with my mostly rope (with 10' of chain at the > end). Do any listers have experience with installing windlasses on one of > these older 35's? Btw, Piper does not have a deck hatch for the anchor rode, > the rode just enter the bow anchor rode locker through a dorade vent at the > aft end of the locker. > > Greg Swetka > 583 Barrington > Grosse Pointe Park, MI 48230 > S.V. Piper C&C 35mkII _______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
