When I pulled the transmission in my Hylas, it took a gasket scraper to clean the bilge. Not sure a wash would have done anything to remove the crud, and the bilge pump probably would have clogged.
I would worry about water getting into the air intake and electrical connections that are in the bilge. I'll take the crud over creating more work. Just my personal preference. Joel On Wed, Jan 25, 2017 at 10:26 AM, Charlie Nelson via CnC-List < cnc-list@cnc-list.com> wrote: > I have been thinking of using a small power washer to clean my engine and > bilge prior to re-painting my Beta 28. Of course I need to seal the > alternator and the plug that connects the engine electrics to the starting > panel before > I begin blasting away with the washer. > > I could never reach some parts of the engine with a brush. > > Before I begin and destroy something, does this seem like a reasonable way > to clean the engine? > > Charlie Nelson > C&C 36 XL/kcb > Water Phantom > New Bern, NC > > cenel...@aol.com > > > -----Original Message----- > From: Jake Brodersen via CnC-List <cnc-list@cnc-list.com> > To: cnc-list <cnc-list@cnc-list.com> > Cc: Jake Brodersen <captain_j...@cox.net>; 'Bev Parslow' < > bparslo...@yahoo.ca> > Sent: Wed, Jan 25, 2017 5:38 am > Subject: Re: Stus-List cleaning the engine compartment. > > Bev, > > Simple Green and Purple Power are my two favorite cleaners. Joel has had > some good success with citrus based cleaners too. Simple Green and citrus > are probably two of the most earth-friendly cleaners, but always dispose of > your cleaning solutions responsibly. > > Jake > > *Jake Brodersen* > *C&C 35 Mk-III “Midnight Mistress”* > *Hampton VA* > > > > *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com > <cnc-list-boun...@cnc-list.com?>] *On Behalf Of *Bev Parslow via CnC-List > *Sent:* Tuesday, January 24, 2017 21:25 > *To:* cnc-list@cnc-list.com > *Cc:* Bev Parslow <bparslo...@yahoo.ca> > *Subject:* Stus-List cleaning the engine compartment. > > With a few drips of oil and some water from the stuffing box the engine > compartment is quite messy. I really would like to have it clean as well as > the bilge. Are there any suggestions? > _______________________________________________ > > This list is supported by the generous donations of our members. If you > wish to make a contribution to offset our costs, please go to: > https://www.paypal.me/stumurray > > All Contributions are greatly appreciated! > > _______________________________________________ > > This list is supported by the generous donations of our members. If you > wish to make a contribution to offset our costs, please go to: > https://www.paypal.me/stumurray > > All Contributions are greatly appreciated! > > -- Joel 301 541 8551
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!