John, Get aa hydraulics shop to look at it.. If you don't have one I do in Hamilton who have done a couple for friends boat pistons for me .....
Get Outlook for iOS<https://aka.ms/o0ukef> ________________________________ From: CnC-List <cnc-list-boun...@cnc-list.com> on behalf of John McKay via CnC-List <cnc-list@cnc-list.com> Sent: Friday, January 13, 2017 9:45:15 AM To: cnc-list@cnc-list.com Cc: John McKay Subject: Stus-List Navtec back stay tensioner Continuing in my saga to figure out why the tensioner does not hold, I have unscrewed every screw and bolt and guage. Nothing looks worn but I know that something being old and brittle could be the issue. It seems to me the tensioner drum itself has to come apart so you can get at the seals or o-ring at the bottom of the piston. I cannot see how to open this. Does anyone know how this comes apart? I have the Navtec 10 - 7 which is the square sided drum Thanks John on Enterprise
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!