In all pictures the goose neck is to the right. In one I removed the device from the boom and you can see the device is incapable of being reversed.(that was my first thought and the reason for removing it). I guess there are only 2 possibilities left: either the sheet or the sheave are too big, or both. Does anyone have the same setup and can measure the gap of the exit hole on the aft end? > > Message: 1 > Date: Sat, 08 Oct 2016 12:37:00 -0400 > From: "Don Wagner" <don.wag...@verizon.net> > To: <cnc-list@cnc-list.com> > Subject: Re: Stus-List Main sheet chafes > Message-ID: <6537CB000F7541D7B7B6F7B0CFB63AE1@HPPhoenix> > Content-Type: text/plain; charset="utf-8" > > Brian > > I can?t tell from the photo, the direction of the boom, eg, is the gooseneck on the left or the right of the photo? > Maybe the exit block is mounted in the wrong direction????? I know it is a stupid question, but maybe some how it got turned around. > > It looks like some serious chafing! > > Don Wagner > C&C 41CB > Der Baron > West River MD > > > From: Joel Aronson via CnC-List > Sent: Saturday, October 08, 2016 10:26 AM > To: cnc-list@cnc-list.com > Cc: Joel Aronson > Subject: Re: Stus-List Main sheet chafes > > Brian, > > How old and large is that line? Is it too big for the sheave? If it is original to the boat, it may just be time to replace it. > > Joel
_______________________________________________
This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated!
