Dwight, If you reply with a different email (from what you have registered with, originally), the list would consider it an "alien intrusion" and would reject it. If you prefer using your gmail account, you have to un-register your bellaliant email and register back with your gmail (you may want to register new email first and check that it works).
Marek -----Original Message----- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of dwight veinot via CnC-List Sent: Sunday, October 02, 2016 10:35 To: cnc-list@cnc-list.com Cc: dwight veinot <dwight...@gmail.com> Subject: Re: Stus-List test Thanks I tried to post many times but failed on my gmail account, that was from my bellaliant account. I can reply on gmail but I never see my posts on new topics. Anyway I sent asking for assistance from listers here with my Raymarine st60+ speed display head. It shows only 0's and I tested it with 2 different transducers. Got damaged along with my chart plotter, vhf radio and stereo I think during an electrical storm near end july which took out stuff in nearby houses. I have the st60+ package wind speed and depth plus a graphic display all mounted in a pod over the companionway, and all display heads match. I understand that I can replace the speed display head with a new i50 head which will work with the package but I want to try to maintain the matching appearance. A local marine electronics repair shop agreed to check it out even though they no longer service raymarine gear. Raymarine has no repair shops around here so everything has to go to the US, that's what the Binnacle told me. Problem with the unit is in a single ic chip that is supposed to send 12 V to the transducer but only sends 4 V. The tech informed me that the chip has no markings on it so he couldn't source a new chip which is all he thinks I need, not even from Raymarine was able to help him and what's more Raymarine no longer carry the board that contains the chip. So I am asking here if anyone may be able to help me with identifying the chip or maybe where I can get the board that contains the chip. Also I would be very interested in a used but functioning st60+ speed display head. Thanks and sorry I don't know how to change the title of my post on this gmail account Dwight Veinot C&C 35 MKII, Alianna Head of St. Margaret's Bay, NS d.ve...@bellaliant.net On Sun, Oct 2, 2016 at 10:28 AM, Joel Aronson via CnC-List <cnc-list@cnc-list.com> wrote: > Loud and clear > Joel > > > On Sunday, October 2, 2016, dwight veinot via CnC-List > <cnc-list@cnc-list.com> wrote: >> >> Dwight Veinot >> C&C 35 MKII, Alianna >> Head of St. Margaret's Bay, NS >> d.ve...@bellaliant.net >> >> _______________________________________________ >> >> This list is supported by the generous donations of our members. If >> you like what we do, please help us pay for our costs by donating. >> All Contributions are greatly appreciated! > > > > -- > Joel > 301 541 8551 > > _______________________________________________ > > This list is supported by the generous donations of our members. If > you like what we do, please help us pay for our costs by donating. All > Contributions are greatly appreciated! > _______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated! _______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated!