David, I would check with the manufacturer to see what you can use over AwlGrip.
On Tue, Sep 20, 2016 at 9:59 AM, David via CnC-List <cnc-list@cnc-list.com> wrote: > Neil, > > You are the man...as my next question was how to follow the extreme > curvature under the stern (waterline and curves widens radically to > maintain visual width when hull tucks under). > > This is my solution. > > Thanks! > > David F. Risch > (401) 419-4650 (cell) > > > ------------------------------ > To: cnc-list@cnc-list.com > Date: Mon, 19 Sep 2016 19:42:14 -0400 > Subject: Re: Stus-List Repainting Waterline Stripe... > From: cnc-list@cnc-list.com > CC: schil...@bloomingdalecom.net > > Glenn Gambell from the list turned me on to using electrical tape to mask > the boot strip. extremely flexible and cheap, if there is a Harbour > Freight nearby. > > Neil Schiller > 1970 Redwing 35, Hull #7 > (C&C 35, Mark I) > "Corsair" > > On 9/19/2016 2:44 PM, Andrew Burton via CnC-List wrote: > > Yes, tape the stripes then sand up to them. I'd say wet sand with 220 or > 320, depending on how much shine you're after. If the tape edge gets messed > up, just re-tape it before you paint. > I'd use awl grip, again. I would call the techs at the company and ask if > you need to prime over the old awl grip. Use a decent brush and paint them > one at time so you don't lose your "wet edge" and you should be fine. > > Cheers > Andy > C&C 40 > Peregrine > > > > On Mon, Sep 19, 2016 at 2:37 PM, David via CnC-List <cnc-list@cnc-list.com > > wrote: > > Want to freshen up Awlgriped water line stripes. > > I assume I need to sand it but do not want to sand the topsides or the > blue stripe between the two white stripes. I will be taping of course but > just sand over tape? Wont the sanding affect the tapes edge and therefore > the ultimate paint line will be sloppy? > > Paint choice for painting and any other suggestions for the job? > > Thanks in advance > > David F. Risch > 1981 40-2 > (401) 419-4650 (cell) > > _______________________________________________ > > This list is supported by the generous donations of our members. If you > like what we do, please help us pay for our costs by donating. All > Contributions are greatly appreciated! > > > > > -- > Andrew Burton > 61 W Narragansett Ave > Newport, RI > USA 02840 > http://sites.google.com/site/andrewburtonyachtservices/ > phone +401 965 5260 > > > _______________________________________________ > > This list is supported by the generous donations of our members. If you like > what we do, please help us pay for our costs by donating. All Contributions > are greatly appreciated! > > > > _______________________________________________ This list is supported by > the generous donations of our members. If you like what we do, please help > us pay for our costs by donating. All Contributions are greatly appreciated! > > _______________________________________________ > > This list is supported by the generous donations of our members. If you > like what we do, please help us pay for our costs by donating. All > Contributions are greatly appreciated! > > -- Joel 301 541 8551
_______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated!
