Doug was the winner of this one! Despite adequate voltage, the problem is in the wiring. Didn't have time to run a new wire, so I switched the lead to the terminal block for the non-existent radar.
On Mon, Sep 5, 2016 at 5:22 PM, svpegasu...@gmail.com via CnC-List < cnc-list@cnc-list.com> wrote: > Joel. Does the VHF say this all the time or only while transmitting? Check > the voltage under load. You probably have a dirty connection. A volt meter > draws very little current, so to get an accurate reading it must be done > under load. > > > Doug Mountjoy > > svPegasus > > LF38 #4 > > just west of Ballard, WA. > > > > ------ Original message------ > > *From: *Joel Aronson via CnC-List > > *Date: *Mon, Sep 5, 2016 11:58 > > *To: *cnc-list@cnc-list.com; > > *Cc: *Joel Aronson; > > *Subject:*Stus-List VHF says low battery > > > My fixed mount VHF says low battery. My meter says there is 13.1 volts at > the final connection. Radio is West marine 500(Uniden) > Suggestions? > > Joel > > > -- > Joel > 301 541 8551 > > _______________________________________________ > > This list is supported by the generous donations of our members. If you > like what we do, please help us pay for our costs by donating. All > Contributions are greatly appreciated! > > -- Joel 301 541 8551
_______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated!
