My 35/3 had a fairly light Danforth and 10 feet of chain. I used it only as a lunch hook, and it was pretty easy to haul up by hand.
My 44 has a 35 pound anchor (considered light for the boat by many) and 25 feet of 3/8 stainless chain. When I tripped the breaker on the windlass and did not know how to reset it, I needed help hauling up the anchor and chain. Can't live with em, can't live without em! Joel On Wed, Aug 17, 2016 at 11:02 AM, Della Barba, Joe via CnC-List < cnc-list@cnc-list.com> wrote: > I use 30 feet of chain because I got tired of all the cruisers anchoring > with all chain and me having to be way off to allow 7:1 scope swing room. > Having 30 feet of 5/16 and anchoring in usually 8-15 feet of water works > well. I have no windlass now, but I wouldn’t mind one. IMHO much past 35 > feet and lack of a windlass will be painful with the correct size chain and > anchor. > > Joe > > Coquina > > C&C 35 MK I > > > > *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of > *Frederick > G Street via CnC-List > *Sent:* Wednesday, August 17, 2016 10:52 > *To:* cnc-list@cnc-list.com > *Cc:* Frederick G Street > *Subject:* Re: Stus-List Windlass rebuff > > > > Also, anyone who cruises in tropical areas *NEEDS* chain, to avoid chafe > on the occasional chuck of dead coral... > > > Fred Street -- Minneapolis > S/V *Oceanis* (1979 C&C Landfall 38) -- Bayfield, WI > > > > On Aug 17, 2016, at 9:18 AM, Chuck Gilchrest via CnC-List < > cnc-list@cnc-list.com> wrote: > > > > Chuck, > > Avoiding chain on anchor rode means you’re giving up one of the most > important aspects of the rode: the catenary effect of shock absorbsion. > By allowing some of the chain to lie on the ocean (or lake) bottom, the > effort that it takes to lift the chain off the bottom before the line goes > taut, serves as a shock absorber to wave, wind, or current. Also, using > chain on an anchor rode means you can get by with a somewhat shorter scope > in a crowded anchorage without worrying that your anchor will break free. > > Using only rope between your clean and the anchor allows for very little > catenary and as such, your cleat and the anchor rope is bearing the entire > shock load of the boat all the time. If I had only rope on my anchor line, > I would make sure I had a proper anchor rode snubber, rubber or otherwise, > to manage those loads. > > On Half Magic, we use 25’ of 5/16” Galv BBB chain spliced to 200’ of 5/8” > NovEight Novabraid 8 plait rope with a 25lb CQR anchor (which is probably a > bit light for the size and weight of the boat). We rarely anchor in more > than 20’ of water where we sail although we might rethink that if we decide > to cruise up in Maine or Nova Scotia. > > > > Chuck Gilchrest > > S/V Half Magic > > 1983 Landfall 35 > > Padanaram, MA > > > > _______________________________________________ > > This list is supported by the generous donations of our members. If you > like what we do, please help us pay for our costs by donating. All > Contributions are greatly appreciated! > > -- Joel 301 541 8551
_______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated!
