Hi Jerry, Do you have a picture of the conversion? I want to replace my traveller on my 29-2 and I'd love to see what you did.
Thanks, Gene 29-2 Hawk On Wed, Jul 27, 2016 at 10:10 AM, <cnc-list-requ...@cnc-list.com> wrote: > > > My C&C 29-2 came with a Schaefer 1 inch traveller car that is no longer > made. I found an inexpensive way of converting this car to a twin block > car and it worked quite well. My 27-5 came with the same traveller car so > I just did the same simple conversion and thought I share it with list. The > secret are Harken 10 bullet block sheaves with Delron bearings. They are > 1.25 inches and a perfect fit. Unscrew the eye strap and remove the two > 1/4 inch screws. The sheaves have a perfect match 1/4 inch hole. Cut a > piece of 1.5 inch by 3x 1/4 aluminum bar for top plate and drill two 1/4 > inch holes to mount strap. Replace the original 1/2 inch long screws with > 1.5 inch screws. Put the screws through the strap, cover plate and sheaves > and attach. Round the edges of the cover plate. Makes a nice looking car > and works well with no outside blocks flopping around. You can even double > the sheaves for a four block car if desired. Sheaves are only $10. Jerry > J&J > > > Sent from my iPhone > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: < > http://cnc-list.com/pipermail/cnc-list_cnc-list.com/attachments/20160727/304b3934/attachment-0001.html > > > > ------------------------------ >
_______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated!
