And they’re “Morse” cables — it used to be Morse/Teleflex, but now is just Teleflex.
— Fred Fred Street -- Minneapolis S/V Oceanis (1979 C&C Landfall 38) -- Bayfield, WI > On Jul 26, 2016, at 10:16 AM, Frederick G Street via CnC-List > <cnc-list@cnc-list.com> wrote: > > Bob — when I replace my pedestal a couple of years ago, I replaced the engine > cables as well. Here are the part numbers I used: > > Teleflex CCX63306 throttle (10-32 stud x 6' long) > Teleflex CCX64307 trans (5/16-24 stud x 7' long) > > I have a Yanmar 3QM; so if your engine is different, the cable lengths may be > as well. And these are on an Edson 336-5-211T pedestal, with the two-lever > controls where the transmission is on the aft side of the housing and the > throttle is on the starboard side. > > — Fred > > > Fred Street -- Minneapolis > S/V Oceanis (1979 C&C Landfall 38) -- Bayfield, WI > >> On Jul 26, 2016, at 10:03 AM, Robert Boyer via CnC-List >> <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>> wrote: >> >> I am making last minute preparations to leave cruising this fall. I want to >> carry spare Morris cables for both the gear shift and the throttle since I >> have had these fail many years ago. Since I don't want to remove them just >> to make measurements, does anyone have the specs on these cables for >> ordering? >> >> Bob
_______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated!
