I know... I don't have it here at the boat... Thanks
Sent from my T-Mobile 4G LTE Device -------- Original message --------From: Frederick G Street via CnC-List <cnc-list@cnc-list.com> Date: 5/29/16 7:19 PM (GMT-05:00) To: cnc-list@cnc-list.com Cc: Frederick G Street <f...@postaudio.net> Subject: Re: Stus-List Radar power wire Danny — RTFM… :^) Page 16 of the HD Digital Radome Scanner user’s guide: Grounding These grounding requirements are applicable for Raymarine equipment supplied with a separate drain wire or screen. • The product power cable drain conductor (screen) must be connected to a common ground point. • It is recommended that the common ground point is a bonded ground, i.e. with the ground point connected to battery negative, and situated as close as possible to the battery negative terminal. If a bonded ground system is not possible, a non-bonded RF ground may be used. So tie it with the black wire to the power source (DC breaker). — Fred Fred Street -- Minneapolis S/V Oceanis (1979 C&C Landfall 38) -- Bayfield, WI On May 29, 2016, at 5:15 PM, Danny Haughey via CnC-List <cnc-list@cnc-list.com> wrote: Hi guys, I need a little wiring advice. There are 3 wires for the radar power. RedGreenBlack Red to breakerBlack to ground barGreen to ...? ThanksDanny
_______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated!
