Josh,
Any pictures?
Danny
On 5/20/2016 7:55 AM, Josh Muckley via CnC-List wrote:
Hey guys,
Thanks for all the feedback about mastboots. I ended up going with a
tape type material. The options I found were a 4"x100" white material
and a 5"x72" black material. Rig-rite had both. When comparing the
two products I found the white one was 0.5mm thick and I could expect
to get at least 4 wraps for a total of 2.0mm. Because of it's 4"
width there was a likelihood that I would have to taper the wrap up
resulting in areas that only had 2 or 3 layers thick instead of 4.
The black product was long enough to get a minimum of 2 wraps and more
likely 3 with no need to taper the overlaps since it is 5" wide. So,
despite the product being shorter, there was a good likely that a
total thickness of 4.0mm would be achieved. That's twice the
thickness! This seemed like a no brainer. I purchased the black
product from rig-rite for ~$50 total. I installed it last night.
Very pleased with the results. It ISN'T silicone tape. It's a rubber
product and is very adhesive to itself. If it touches itself you're
pretty much done. The rubber will stretch to about 1.5 times its
original length. They also recommend that you protect it with a
fabric cover which I already had.
Josh Muckley
S/V Sea Hawk
1989 C&C 37+
Solomons, MD
_______________________________________________
This list is supported by the generous donations of our members. If you like
what we do, please help us pay for our costs by donating. All Contributions are
greatly appreciated!
_______________________________________________
This list is supported by the generous donations of our members. If you like
what we do, please help us pay for our costs by donating. All Contributions are
greatly appreciated!
