Don:
For what it's worth, I dealt with Hammerhead Nautical Systems for hatch
seals....the owner worked for Atkins & Hoyle......knows his stuff.....I
was ordering the wrong size and he corrected me....best price....and he
sent me a tube of sealant, no cost. Nice guy, I'd like to be treated
his way all the time.
Rob Abbott
AZURA
C&C 32 - 84
Halifax, N.S.
On 2016-04-18 3:52 PM, Don Harben via CnC-List wrote:
Hi Steve,
I think that you are a Toronto boat!
I need some as well, in two sizes, small head hatch and forward
hatch. Fred was fabulous putting together a plexi template order for
my small hatch. Ed put together a premium butyl order and we
rendezvoused outside the Art Gallery of Ontario....
I am wondering if we might find a local Ontario supplier for the glue
and the foam rod and split it up. I will check around to see what I
can find from these possible suppliers:
1. SB Simpson Industrial Supplies, Tools and Equipment
http://www.sbsimpson.com/
2. Atkins and Hoyle
http://atkinshoyle.com/hatch-repairs.html
3. Hammerhead Nautical Systems
http://www.hhns.ca/products-parts
4. Holland Marine
http://hollandmarine.com
I am 7-8 hr drive from my boat ... so I will go with others A&H gasket
sizing.
Don
Don Harben
Life
V34 www.ncyc.ca <http://www.ncyc.ca>
Oakville for now ...
On Apr 18, 2016, at 2:25 PM, Stevan Plavsa via CnC-List
<cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>> wrote:
Joel, I need some!
Feel free to email me offline to arrange $$ and shipping. No way any
of us needs 100 feet.
Steve
Suhana, C&C 32
Toronto
On Mon, Apr 18, 2016 at 2:08 PM, Joel Aronson via CnC-List
<cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>> wrote:
Atkins & Hoyle will sell you the world's most expensive seal, or
you can get a large roll at McMaster Carr.
http://www.mcmaster.com/#epdm-foam-cords/=116i66x
or hope someone has some laying around. I'm ordering 1/2 inch if
anyone needs some.
BTW, I used Goo Gone to loosen the adhesive. Worked great!
Joel
35/3
Annapolis
On Mon, Apr 18, 2016 at 12:42 PM, Franklin Schenk via CnC-List
<cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>> wrote:
It appears that the seal on the forward hatch on our C&C 29
is leaking. I was thinking of replacing it with a 3/8 by 3/4
foam rubber seal. I cut out a piece of the original seal and
it looks as if it was round. Any suggestions?
Frank
_______________________________________________
This list is supported by the generous donations of our
members. If you like what we do, please help us pay for our
costs by donating. All Contributions are greatly appreciated!
--
Joel
301 541 8551 <tel:301%20541%208551>
_______________________________________________
This list is supported by the generous donations of our members.
If you like what we do, please help us pay for our costs by
donating. All Contributions are greatly appreciated!
_______________________________________________
This list is supported by the generous donations of our members. If
you like what we do, please help us pay for our costs by donating.
All Contributions are greatly appreciated!
_______________________________________________
This list is supported by the generous donations of our members. If you like
what we do, please help us pay for our costs by donating. All Contributions are
greatly appreciated!
_______________________________________________
This list is supported by the generous donations of our members. If you like
what we do, please help us pay for our costs by donating. All Contributions are
greatly appreciated!
