Jason My LF38 has wire rope sheaves;
2 Jib and one Main, are identical 4 OD, ½ ID, 9/16 wide, with Oilite bushing. Rope size is 7/16 There is a number 523318 stamped on them, in case that is a help. I googled my brains out with that number, but came up empty. Closest that I have found, Just rope, is from Rigrite 4" Aluminum Sheave w/ Integral Bronze Bushing - 1/2" wide, 1/2" ID: PP S16AR8-B8: Anodized Aluminum Sheave with integral Oilite Bronze bushing is 4" OD x 1/2" wide x 1/2" ID. Special Narrow Sheave for traditional masthead applications has Rope groove for line up to 7/16" diameter. Features relieved walls to reduce weight I am in the process of; - Changing both jib sheaves to rope only. (Using the above, unless anyone posts a better match) - Moving one unused Jib Sheave to replace the worn Main sheave. - Removing the existing Jib halyard and keeping it as a spare Main I would be interested to see what the experts reply and advise. thanks John From: jaw...@mymts.net [mailto:jaw...@mymts.net] Sent: Thursday, March 17, 2016 10:49 AM To: cnc-list@cnc-list.com Subject: Stus-List masthead sheaves I am looking for another masthead sheave for my lf38. I have the wire/rope sheaves and would like to stay with that system. Does anyone know where you can source them. Thanks, Jason
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
